
Products · Washers
Special flat washers
Round and flat washers in non-standard sizes and special materials, made by HAGUE FASTENERS from mild steel through to duplex and nickel alloys.
1971
Making special washers for over half a century
1 to 500
Single prototypes to batches of several hundred
Any grade
Mild steel to duplex and nickel alloys
UK, EU, US
Mill origin of every bar we use
Washers
If it is not a stocked washer, we can make it
HAGUE FASTENERS makes flat washers in the UK in any material you need, from non-standard mild steel sizes to duplex and nickel alloys. If it is not a standard stocked, mass-produced washer, we can make it.
A flat washer spreads the load under a nut or bolt head, protects the joint surface and bridges oversized holes. Thick, machined and hardened washers are made to drawing for heavy bolting.
Where they are used
- Flange and pressure equipment bolting
- Structural and HV bolting
- Oversized and slotted holes
- Soft or coated joint faces
- Matching washers for special studs and nuts
Typical specifications
Options we make to
The standards listed are those we are most often asked to make to or modify. The part supplied always follows your drawing or specification.
| Option | Typical choices |
|---|---|
| Forms | Plain, chamfered, thick machined, large outside diameter, special sizes |
| Standards | ISO 7089, ISO 7090, ISO 7093, DIN 125, DIN 126, DIN 433, DIN 440, DIN 9021, DIN 6916, DIN 6340, BS 4320, BS 3410, ASME B18.22.1, ASME B18.22M |
| Grades | Mild steel, hardened alloy steels, stainless, duplex, nickel alloys, bronzes, polymers |
| Threads | Metric coarse and fine, UNC, UNF, UN, BSW, BSF and special forms |
| Finishes | Plain, passivated, zinc flake, zinc nickel, electroless nickel, PTFE and others via coatings |
| Documentation | CoC, EN 10204 3.1 and 3.2, test reports, laser-marked heat codes |
Materials
Any grade, made in the UK
See all fastener materials. Grades are selected for corrosion, temperature and strength, and we are happy to advise.
Typical materials
- Carbon and alloy steels, hardened and tempered where required
- Stainless steels: 304, 316, 17-4PH
- Duplex and super duplex: S31803, S32750, S32760
- Inconel, Monel and Hastelloy
- Titanium and bronzes
- Nylon, PTFE and other polymers for isolation
Why buyers come to us
- Made in our Willenhall facility, from one-offs to several hundred
- Bar from UK, EU and US mills only, with heat traceability
- Modified standards and parts to customer or OEM drawings
- EN 10204 3.1 or 3.2 certificates and UKAS-accredited testing
- Copies made from a sample or photograph, with upgrades if needed
Related products
Related types
All washer types
Back to the washers family
Custom fasteners
Made to your drawing
Questions
Frequently asked questions
What is the difference between ISO 7089 and ISO 7090?
Both are normal series flat washers. ISO 7089 is plain, while ISO 7090 has a chamfer on one side.
Can you make flat washers in super duplex?
Yes. We make super duplex, duplex and nickel alloy washers to match the studs and nuts in the same joint.
Do you make thick or hardened washers?
Yes. Thick machined and hardened washers are made to drawing for heavy bolting and pressure equipment.
Is there a minimum order quantity?
No. We make single prototypes and urgent breakdown replacements as well as batches of several hundred.
Washer enquiry?
Send us your drawing or specification
Tell us the inside and outside diameters, thickness, grade, quantity and documentation you need and we will come back to you quickly.
