
Materials · Engineering polymers
Plastic fasteners and machined polymer parts
HAGUE FASTENERS makes plastic fasteners and precision polymer parts to your drawing in the UK: bolts, nuts, washers, spacers and machined components in nylon, PTFE, acetal, UHMWPE, Tufnol and other engineering plastics.
13+
Engineering polymers machined to order
1 to 500
Single prototypes to batches of several hundred
Isolating
Electrically insulating and non-magnetic
To drawing
Precision turned and milled parts
Why polymers
When metal is the wrong answer
Plastic fasteners are used where a metal part would conduct, corrode, add weight or damage the surface it touches. Engineering polymers are electrically insulating and non-magnetic, many resist chemicals that attack metals, and some, such as PTFE and acetal, have very low friction.
HAGUE FASTENERS machines polymer parts to your drawing alongside our metal work, so a project that needs both insulating and metal components can be supplied from one source. Thermoplastics, thermoset laminates and composite materials can all be machined.

Materials and parts
Polymers we machine and parts we make
Other polymers are available on request. Tell us the grade on your drawing.
Common materials
- Nylon 6 and Nylon 66
- Acetal and Delrin
- G10 epoxy glass
- Oilon
- HDPE
- Polypropylene
- Polyurethane
- PTFE
- Tufnol
- UHMWPE
Typical components
- Hex bolts, hex nuts and screws
- Washers and thrust washers
- Spacers and sockets
- Clamping rings, retaining rings and seal rings
- Rollers, splines and lantern rings
- Valves, valve seats and clamps
- Mandrels and connectors
Choosing a polymer
Matching the polymer to the duty
Typical selections only. For non-magnetic metal alternatives, see non-ferrous alloys and austenitic stainless steels.
| Service need | Polymers usually considered |
|---|---|
| Electrical isolation of flanges and joints | G10 epoxy glass, Tufnol, nylon |
| Chemical resistance | PTFE, polypropylene, HDPE |
| Low friction and wear | PTFE, acetal, UHMWPE, Oilon |
| General purpose light fasteners | Nylon 6, Nylon 66 |
| Toughness and abrasion resistance | Polyurethane, UHMWPE |
Related products
Where polymer parts fit
Washers
Plain, special and machined washers
Nylon insert nuts
Locking nuts with polymer inserts
Turned and milled parts
Machined to your drawing
Plugs
Turned plugs to drawing
Bolts
Special bolts in any material
Custom fasteners
Parts made to your design
Quality
Made and checked to your drawing
Polymer parts are made under the same ISO 9001 quality system as our metal fasteners, with material certificates, dimensional inspection in our climate-controlled inspection room and certificates of conformity. See quality and testing.
- Material certificates where available
- Dimensional reports to your drawing
- Certificates of conformity
- Laser-marked part numbers where suitable

Questions
Frequently asked questions
Can you make plastic fasteners to my drawing?
Yes. We machine plastic fasteners and polymer components to customer drawings, from one prototype to several hundred parts.
Which plastic is best for insulating bolts?
G10 epoxy glass and Tufnol are common for insulating sleeves and washers because they are strong and electrically insulating. Nylon is used for lighter duty parts.
Is PTFE good for fasteners?
Yes, for low load duty. PTFE resists almost all chemicals and has very low friction, but it is soft, so it is used for washers, seals and light parts rather than highly loaded bolts.
What is the difference between nylon 6 and nylon 66?
Both are polyamides; nylon 66 is generally a little stiffer and has a higher melting point than nylon 6. Either can be machined to order.
Polymer parts enquiry?
Send us your drawing
Tell us the material, sizes, quantity and documentation you need and we will come back to you quickly.
