Foundation bolt with threaded end

Industries · Construction

Construction fasteners for bridges, foundations and civil works

Foundation bolts, anchor bolts, tie rods and structural specials, made to your drawing in our Willenhall facility for bridge maintenance, civil engineering and restoration projects.

S355

Structural steel, plus high tensile grades

8.8 to 14.9

Strength classes to ISO 898

1 to 500

One-off replacements to project batches

3.1

EN 10204 material certificates

Built into the structure

Bolting that has to last as long as the concrete

HAGUE FASTENERS makes construction fasteners in the UK for bridges, civil engineering and heavy groundworks. Over the years we have made many types of bolting for large-scale bridge maintenance and refurbishment, where the original fasteners are often non-standard and long out of production.

A foundation bolt cast into concrete cannot be swapped next year. Getting the length, thread, grade and finish right first time matters, so we review the drawing with you and flag risks before any bar is cut.

Where our fasteners go

  • Bridge construction and maintenance
  • Crane manufacturers
  • Steel constructions
  • Groundworks and piling equipment
  • Foundation works and heavy civil engineering
  • Project management companies
  • Restoration projects

Materials

Grades for structural and civil work

The grade supplied always follows your specification. Galvanising and zinc flake coatings are available through our approved partners.

GradeTypical use
S355 structural steelTie rods, anchors and fabricated bolting to match the steelwork
Classes 8.8, 10.9, 12.9 and 14.9High strength bolts, including high strength friction grip (HSFG) bolting
708M40T and 709M40TQuenched and tempered alloy steel for heavily loaded studs and bolts
EN3B and EN8General purpose and medium carbon bolting
EN16T, EN19T, EN24T and EN26 (V and W conditions)High tensile alloy steels for demanding structural duty
Stainless steelsExposed or architectural fixings where corrosion is the concern

Products

Construction fasteners we make

Foundation bolts

Foundation bolts

Cast-in holding-down bolts to drawing.

Tie bars and tie rods

Tie bars and tie rods

Long threaded bars for tension members.

J bolts

J bolts

Bent anchor bolts for setting in concrete.

Hexagon bolts

Hexagon bolts

Heavy hex structural and HSFG-style bolts.

Connector nuts

Connector nuts

For joining threaded rod and tie bars.

Washers

Washers

Plate, hardened and machined washers.

Restoration and refurbishment

Matching what was there before

On refurbishment work the drawing may be lost and the old bolt corroded beyond recognition. Send us a photograph beside a rule for a quick estimate, then the sample. We can match the original head, thread and length, or upgrade the material and finish so the replacement outlasts the first one.

  • Reverse engineering from a sample or photograph
  • Imperial BSW and BSF threads for older structures
  • Galvanised and zinc flake finishes
  • Certificates for the project file
Checking the thread length on a large machined part

Questions

Frequently asked questions

What construction fasteners do you make?

We make foundation and anchor bolts, J bolts, tie rods and tie bars, heavy hex and high strength friction grip bolts, connector nuts and washers, to drawing or standard.

Can you make long foundation bolts to our drawing?

Yes. Foundation and holding-down bolts are made to your drawing, with the bend, thread length and finish you specify.

Do you supply galvanised construction fasteners?

Yes. Galvanising and other coatings are carried out by our approved partners and certified batch by batch. See coatings.

Can you replace bolts on an old bridge or building?

Yes. We reverse engineer non-standard and imperial bolts from samples and can upgrade the material if needed.

Construction project?

Send us the drawing or the old bolt

Tell us the grade, sizes, finish and quantity and we will quote quickly.