
Products · Studs
Wheel studs
Custom wheel studs reverse engineered and made in the UK for vehicles where a standard stud will not do: longer studs, older farm, commercial and classic vehicles, higher strength, and left or right hand threads.
12 off
Or call-off against a longer term order
1 to 500
Single prototypes to batches of several hundred
UK, EU, US
Mill origin of every bar we use
3.1 / 3.2
EN 10204 certificates with full traceability
About Wheel studs
Wheel studs reverse engineered from your sample
Wheel studs are pressed or screwed into the wheel hub, and the wheel nuts clamp the wheel onto them. Every one carries the vehicle’s weight, braking and cornering loads. Almost all the wheel studs HAGUE FASTENERS LIMITED makes are reverse engineered, because the original maker is often unknown or long gone. Send us a sample, even a worn or broken one, and we measure it and make new studs to match, or modified where you need them longer or stronger.
All of our wheel studs are made from UK sourced, quality assured alloy steel, through hardened as required and coated if needed with zinc or manganese phosphate. Recent work includes wheel studs with milled flats. We can supply on call-off against a longer term order, or make 12 off or whatever you need.
Classic coach restoration. We made and donated new wheel studs to help restore a 1960 Guy Victory coach, built in Wolverhampton, for the volunteer-run Aston Manor Road Transport Museum. Read the story.
When a standard wheel stud will not do
- Longer studs for larger hubs, wheel spacers or thicker wheels
- Replacement studs for old tractors, farm machinery and other large vehicles
- Buses, coaches and lorries, including classic restorations
- Higher strength than mass-produced studs, through hardened to class 10.9 or 12.9
- Left and right hand threads, including matched sets
- Trailers, plant and specialist machinery
- Low volume vehicle builds and call-off supply. See transport
Options
Typical specifications
Typical options. We make to your sample, drawing or specification.
| Option | What we make |
|---|---|
| Form | Knurled or serrated press-fit shank, threaded or headed, milled flats to drawing |
| Thread | Metric fine such as M12 x 1.5, M14 x 1.5 and M22 x 1.5, UNF such as 1/2 in x 20, left or right hand, and older imperial forms to sample or drawing |
| Strength | Through hardened alloy steel, classes 10.9 and 12.9 or to specification |
| Standards | Copied from your sample, or to your drawing |
| Finishes | Zinc plating, manganese phosphate, zinc flake or self colour |
| Documentation | Certificate of conformity, EN 10204 3.1 or 3.2, test reports, dimensional reports and FAIR |
Materials
Materials we use
Certified bar from UK, EU and US mills. See all fastener materials.
- Carbon and alloy steels: UK sourced alloy steels such as EN19, EN24 and 42CrMo4
- Stainless steels: 17-4PH and other stainless grades where specified
- Titanium: titanium alloys
Manufacture and quality
Made in Willenhall, certified to release
Turned and threaded in our own Willenhall facility, with batches on automatic bar machines, from certified UK, EU and US bar.
- Heat numbers traced from mill to release
- Heat treatment, NDT and coating by approved partners
- UKAS-accredited testing where specified

Questions
Frequently asked questions
Can you copy a wheel stud from a sample?
Yes. Almost all the wheel studs we make are reverse engineered, because the original maker is often unknown. Send us a sample or the original stud, even a worn one, and we will measure it and make new studs to match, including knurled shanks, special threads and milled flats. We also make to drawings.
Can you make longer wheel studs than standard?
Yes. Tell us the hub, wheel or spacer thickness and the wheel nut, and we will make studs long enough for full thread engagement.
Can you make left hand thread wheel studs?
Yes. We make left and right hand threads, including matched sets for older vehicles that use left hand threads on the nearside wheels.
What material are your wheel studs made from?
Our wheel studs are made from UK sourced, quality assured alloy steel, through hardened to the strength you need, such as class 10.9 or 12.9.
What coatings do you offer for wheel studs?
Zinc plating and manganese phosphate are the most common, and zinc flake coatings are also available through our approved partners.
What is the minimum order for wheel studs?
There is no fixed minimum. We can make 12 off for a prototype or supply on call-off against a longer term order.
What is the difference between a wheel stud and a wheel bolt?
A wheel stud stays fixed in the hub and the wheel is held on with nuts, while a wheel bolt screws through the wheel into the hub. Studs make wheel changes easier, and a damaged stud can be replaced on its own.
Wheel stud enquiry?
Send us a sample or a drawing
Send a sample or drawing with the quantity and finish, and we will quote quickly.
