Use this special fastener enquiry builder from HAGUE FASTENERS LIMITED to specify the special fastener you need: type, thread and size, length, material and grade, specification, coating, certification, quantity and date. It builds a clear summary as you go and sends it straight to our sales team, so we can quote quickly and correctly.
Specify your fastener
We make to the grade and specification you require. Fields marked * are needed. If you would rather, email your drawing and details to sales@haguefasteners.co.uk.
What happens next
- Your enquiry goes straight to our sales team at sales@haguefasteners.co.uk with a reference number.
- We check the material, specification and certification you need, and come back with any questions.
- We send a quotation, usually within one working day for straightforward parts.
Tips for a quick, accurate quotation
- Give the material grade and the specification it must meet, for example ASTM A193 B8M Class 2 or Inconel 718 to API 6A718.
- Tell us the certification you need. EN 10204 3.1 is the most common; 3.2 needs an independent inspector.
- Email your drawing to sales@haguefasteners.co.uk quoting your reference number.
- If you are replacing a part, tell us what it is used on. We always make to the grade and specification you require.
Standard B7 and B16 studs
Standard B7 studs with 2H nuts, and standard B16 studs, are stock items held by stockists and distributors in the UK, Europe and worldwide, who can usually supply them faster and at a lower price. HAGUE FASTENERS LIMITED does not normally quote for them, unless something about them is special, such as tensioning lengths, coatings, 3.2 certification or a breakdown.
Frequently asked questions
What information do you need to quote for a special fastener?
The fastener type, thread and size, length, material grade and the specification it must meet, coating, certification, quantity and when you need it. A drawing or a sample helps, and the enquiry builder above covers all of these.
Can I send a drawing or a sample instead?
Yes. Email your drawing to sales@haguefasteners.co.uk quoting your reference number. If there is no drawing, we can make parts from a sample.
Do you quote for one-off and small quantities?
Yes. We make single prototypes and urgent breakdown replacements as well as batches of several hundred.
What is the difference between EN 10204 3.1 and 3.2 certificates?
A 3.1 certificate is issued by the manufacturer and validated by its own inspection representative, who is independent of manufacturing. A 3.2 certificate is also validated by an inspector appointed by the purchaser or by an independent inspection body.
Will my details be added to a mailing list?
No. Enquiries sent with the enquiry builder are used only to reply to you and prepare your quotation.
More engineering tools
- Bolt and nut matching checker
- Flange bolting finder
- Material equivalents finder
- Hardness conversion calculator
- Tensile strength converter
- Galvanic corrosion checker
- Thread size chart and identifier
- Bolt torque calculator
- Stud bolt weight calculator
- Bar weight calculator
- All engineering tools from HAGUE FASTENERS
