
Materials · Carbon and alloy steels
Durehete bolts, studs and nuts
Durehete bolts, studs, capnuts and nuts in Durehete 900, 950 and 1055, made in the UK by HAGUE FASTENERS LIMITED since 1971. Made to CEGB standards and turbine drawings for new build and outage repairs, from stocks of original Durehete bar, with new material being certified for Durehete duties.
900, 950, 1055
All three Durehete grades
1971
Making Durehete turbine bolting since
CEGB
02596, 02597 and 02598 still made to
3.1 / 3.2
EN 10204 certificates with full traceability
About Durehete
The UK steam turbine bolting steels
Durehete is the historic trade name of a family of creep resisting alloy bolting steels developed in the UK for steam turbines and power station plant. Durehete bolts, studs and capnuts keep their clamp load when hot, so they were specified on British turbine casings, valve chests and steam pipework for decades, and the grades are still called up on many turbine drawings and CEGB standards today.
The Durehete grades are no longer made under the trade name, so original Durehete bar is now hard to find. HAGUE FASTENERS LIMITED still holds stocks of original Durehete bar for the bolting we make, and is drafting its own specification so that new material can be certified for Durehete duties.
What we make in Durehete
- Turbine casing and valve chest studs
- Waisted studs and studs with heater holes
- Capnuts, hexagon nuts and round nuts
- High temperature bolts and washers
- Replacements copied from used studs
- BSF, UN and metric threads to drawing or CEGB standard
Grades
Durehete 900, 950 and 1055
The grade supplied always follows your specification. An equivalent grade is only used where you ask for one or agree to it.
| Grade | CEGB standard | Comparable EN 10269 grade |
|---|---|---|
| Durehete 900 | CEGB 02598 (later GDCD Standard 4): 1 chromium molybdenum steel bars for high temperature bolting | Made to your specification |
| Durehete 950 | CEGB 02597 (later GDCD Standard 3): ½ molybdenum, ¼ vanadium steel bars for high temperature bolting | 40CrMoV4-6 (1.7711) |
| Durehete 1055 | CEGB 02596 (later GDCD Standard 2): 1 chromium, 1 molybdenum, ¾ vanadium steel bars for high temperature bolting | 20CrMoVTiB4-10 (1.7729) |
The CEGB high temperature bolting series covers bolting for steam and fluid design temperatures of 371 to 580°C. Durehete 1055 has long been used for the hottest bolted joints. See also Durehete 1055 fasteners.
New material
New material for Durehete duties
With the Durehete trade name no longer in production, plant owners still need bolting that meets their Durehete and CEGB requirements. HAGUE FASTENERS LIMITED is drafting a specification so that new material can be certified for these duties, starting with Durehete 1055 to EN 10269 (1.7729) with supplementary requirements and EN 10204 3.2 certificates.
- Made to your specification, CEGB standard or turbine drawing
- Heat numbers traced from mill to release
- Heat treatment and testing by approved partners
- Ask us before your next outage

Related
Related products and pages
Questions
Frequently asked questions
What is Durehete?
Durehete is the historic trade name of a family of creep resisting alloy bolting steels (900, 950 and 1055) developed in the UK for steam turbine and power station bolting. The grades are covered by CEGB Standards 02598, 02597 and 02596.
Is Durehete still made?
Not under the trade name. The Durehete grades are no longer produced as Durehete, so original bar is now hard to find. HAGUE FASTENERS LIMITED still holds stocks of original Durehete bar for the bolting we make, and is drafting a specification so that new material can be certified for Durehete duties.
What is Durehete 1055 equivalent to?
Durehete 1055 is comparable with 20CrMoVTiB4-10 (1.7729) in EN 10269, and Durehete 950 with 40CrMoV4-6 (1.7711). Comparable grades are not identical, so we make to the grade and specification you require.
What is the difference between Durehete 900, 950 and 1055?
They are different alloy bolting steels in the same family. Durehete 1055 is a chromium, molybdenum, vanadium steel used for the hottest joints; Durehete 950 is a molybdenum vanadium steel; and Durehete 900 is a chromium molybdenum steel. The turbine drawing or standard sets which one is needed.
Can you make Durehete studs for an outage?
Yes. Send us the stud schedule, a drawing or a used stud. With Durehete bar in stock, outage and breakdown orders can start straight away, with heat treatment and testing through our approved partners.
Can you make Durehete bolting to CEGB standards?
Yes. We make Durehete studs, bolts and nuts to CEGB standards such as 025902, 025903 and 025904 for high temperature bolts, studs and studbolts (BSF), and 027802 for cap nuts, hexagon nuts and round nuts.
Durehete enquiry?
Send us the drawing, standard or a used stud
Tell us the grade, standard, sizes, quantity and test requirements and we will quote quickly.
