Polished hexagon dome nut

Products · Nuts

Special dome nuts

Hexagon dome nuts, also called acorn or cap nuts, made by HAGUE FASTENERS in stainless steels, duplex, superalloys and bronzes, with any thread and to your drawing.

1971

Making special nuts for over half a century

1 to 500

Single prototypes to batches of several hundred

A194

Petrochemical grades, plus classes to 12

UK, EU, US

Mill origin of every bar we use

Nuts

A neat, closed end that protects the thread

HAGUE FASTENERS makes dome nuts in the UK for applications where the standard stocked item is the wrong grade, size or thread. The closed dome covers the end of the bolt, protecting the thread from damage and corrosion and giving a safe, tidy finish.

Many of our dome nuts are made in duplex, super duplex and high specification superalloys. We make less common threads such as BSW, BSF, UNC and UNF, and modified or bespoke versions to customer or OEM drawings.

Where they are used

  • Exposed bolt ends on guards and covers
  • Marine and architectural fittings
  • Food and process equipment
  • Electrical and instrument enclosures
  • Vehicle and rail equipment

Typical specifications

Options we make to

The standards listed are those we are most often asked to make to or modify. The part supplied always follows your drawing or specification.

OptionTypical choices
FormsHigh and low dome, one-piece machined, with or without washer face
StandardsDIN 1587, DIN 917
GradesSteel property classes, A2 and A4 stainless, duplex, nickel alloys, bronzes
ThreadsMetric coarse and fine, UNC, UNF, UN, BSW, BSF and special forms
FinishesPlain, passivated, zinc flake, zinc nickel, electroless nickel, PTFE and others via coatings
DocumentationCoC, EN 10204 3.1 and 3.2, test reports, laser-marked heat codes

Materials

Any grade, made in the UK

See all fastener materials. Grades are selected for corrosion, temperature and strength, and we are happy to advise.

Typical materials

Why buyers come to us

  • Made in our Willenhall facility, from one-offs to several hundred
  • Bar from UK, EU and US mills only, with heat traceability
  • Modified standards and parts to customer or OEM drawings
  • EN 10204 3.1 or 3.2 certificates and UKAS-accredited testing
  • Copies made from a sample or photograph, with upgrades if needed

Questions

Frequently asked questions

What is the difference between a dome nut and an acorn nut?

There is no real difference: dome nut, acorn nut and cap nut are names for the same closed-end hexagon nut. DIN 1587 covers the high form and DIN 917 the low form.

Why use a dome nut?

A dome nut covers the bolt end, protecting the thread from damage and corrosion and protecting people from sharp threads.

Are your dome nuts one piece?

Our dome nuts are machined from solid bar, so the dome and hexagon are one piece in the grade you specify.

Is there a minimum order quantity?

No. We make single prototypes and urgent breakdown replacements as well as batches of several hundred.

Dome nut enquiry?

Send us your drawing or specification

Tell us the size, thread, grade, quantity and documentation you need and we will come back to you quickly.