
Products · Nuts
BiHex and 12-point nuts
BiHex nuts for weight balanced turbine screws through to large diameter 12-point flange nuts, made by HAGUE FASTENERS with internal or external 12-point drives.
1971
Making special nuts for over half a century
1 to 500
Single prototypes to batches of several hundred
A194
Petrochemical grades, plus classes to 12
UK, EU, US
Mill origin of every bar we use
Nuts
Twelve points for compact, high load joints
HAGUE FASTENERS makes bihex nuts in the UK, along with any other 12-point fastener, with either an internal or external 12-point drive. The 12-point form gives a strong drive on a smaller outside diameter, so spanners and sockets fit where a hexagon would not.
Many of our 12-point parts are made in Inconel 718 or highly specified carbon alloy steels, with ultrasonic testing and magnetic particle inspection backing decades of experience in how they are made.
Where they are used
- Gas and steam turbines
- Weight balanced turbine screws
- Aero-derivative and engine assemblies
- Compact, high load flange joints
- High temperature bolting
Typical specifications
Options we make to
The standards listed are those we are most often asked to make to or modify. The part supplied always follows your drawing or specification.
| Option | Typical choices |
|---|---|
| Forms | BiHex nuts, 12-point flange nuts, internal or external 12-point drive, large diameters |
| Standards | Customer and OEM drawings and specifications |
| Testing | Ultrasonic testing and magnetic particle inspection, plus UKAS-accredited mechanical tests |
| Threads | Metric coarse and fine, UNC, UNF, UN, BSW, BSF and special forms |
| Finishes | Plain, passivated, zinc flake, zinc nickel, electroless nickel, PTFE and others via coatings |
| Documentation | CoC, EN 10204 3.1 and 3.2, test reports, laser-marked heat codes |
Materials
Any grade, made in the UK
See all fastener materials. Grades are selected for corrosion, temperature and strength, and we are happy to advise.
Typical materials
- Carbon and alloy steels: mild steel, EN16, EN24, ASTM A194 2H, 4 and 7
- Stainless steels: A2, A4, 316, ASTM A194 8 and 8M, 17-4PH
- Duplex and super duplex: S31803, S32750, S32760
- Inconel, Incoloy and Monel
- Hastelloy and titanium
- Bronzes, brass and copper alloys
Why buyers come to us
- Made in our Willenhall facility, from one-offs to several hundred
- Bar from UK, EU and US mills only, with heat traceability
- Modified standards and parts to customer or OEM drawings
- EN 10204 3.1 or 3.2 certificates and UKAS-accredited testing
- Copies made from a sample or photograph, with upgrades if needed
Related products
Related types
See also 12-point bolts and power generation.
All nut types
Back to the nuts family
Custom fasteners
Made to your drawing
Questions
Frequently asked questions
What are bihex nuts?
Bihex nuts are nuts with a 12-point drive, also called a double hexagon. It gives a strong drive on a smaller outside diameter than a hexagon nut.
What materials are 12-point nuts made from?
Many are made in Inconel 718 or high strength alloy steels for turbine and high temperature duty. We make them in whichever grade your drawing specifies.
Can you test 12-point nuts?
Yes. Ultrasonic testing, magnetic particle inspection and independent mechanical tests are available, with reports supplied.
Is there a minimum order quantity?
No. We make single prototypes and urgent breakdown replacements as well as batches of several hundred.
12-point enquiry?
Send us your drawing or specification
Tell us the size, thread, grade, testing, quantity and documentation you need and we will come back to you quickly.
