Long hexagon connector nut

Products · Nuts

Special connector nuts

Long hexagon connector nuts, also called coupling nuts, made by HAGUE FASTENERS to join threaded rods and studs, in any grade and thread form.

1971

Making special nuts for over half a century

1 to 500

Single prototypes to batches of several hundred

A194

Petrochemical grades, plus classes to 12

UK, EU, US

Mill origin of every bar we use

Nuts

Joining two threads in one length

HAGUE FASTENERS makes connector nuts in the UK for joining threaded rod, studs and tie bars. A connector nut is a long hexagon nut, tapped through, that couples two male threads or extends a threaded length.

Many of our connector nuts are made in duplex, super duplex and superalloys. We make BSW, BSF, UNC and UNF threads, and the biggest call is now for modified standards and bespoke parts to customer or OEM drawings, including left and right-hand threads.

Where they are used

  • Joining threaded rod and tie bars
  • Suspension and hanger systems
  • Tensioning and adjustment
  • Foundation and anchor bolt extensions
  • Structural and steel fabrication

Typical specifications

Options we make to

The standards listed are those we are most often asked to make to or modify. The part supplied always follows your drawing or specification.

Option Typical choices
Forms Long hex, round or square body, sight hole, left and right-hand threads
Standards DIN 6334, DIN 6330, ASME B18.2.2
Grades Steel property classes, A2 and A4 stainless, duplex, nickel alloys
Threads Metric coarse and fine, UNC, UNF, UN, BSW, BSF and special forms
Finishes Plain, passivated, zinc flake, zinc nickel, electroless nickel, PTFE and others via coatings
Documentation CoC, EN 10204 3.1 and 3.2, test reports, laser-marked heat codes

Materials

Any grade, made in the UK

See all fastener materials. Grades are selected for corrosion, temperature and strength, and we are happy to advise.

Typical materials

Why buyers come to us

  • Made in our Willenhall facility, from one-offs to several hundred
  • Bar from UK, EU and US mills only, with heat traceability
  • Modified standards and parts to customer or OEM drawings
  • EN 10204 3.1 or 3.2 certificates and UKAS-accredited testing
  • Copies made from a sample or photograph, with upgrades if needed

Questions

Frequently asked questions

What is a connector nut?

A connector nut, or coupling nut, is a long hexagon nut used to join two threaded rods or studs end to end.

Can you make a connector nut with left and right-hand threads?

Yes. Opposite-hand threads at each end make the nut work as a tensioner, drawing both rods in as it turns.

What length is a connector nut?

DIN 6334 connector nuts are three times the thread diameter long. We also make other lengths to your drawing.

Is there a minimum order quantity?

No. We make single prototypes and urgent breakdown replacements as well as batches of several hundred.

Connector nut enquiry?

Send us your drawing or specification

Tell us the size, thread, grade, quantity and documentation you need and we will come back to you quickly.