
Products · Nuts
Slotted and castle nuts
Slotted and castle nuts for split pin and lock wire locking, made by HAGUE FASTENERS in duplex, super duplex and superalloys, with any thread form.
1971
Making special nuts for over half a century
1 to 500
Single prototypes to batches of several hundred
A194
Petrochemical grades, plus classes to 12
UK, EU, US
Mill origin of every bar we use
Nuts
Positive locking with a split pin
HAGUE FASTENERS makes slotted and castle nuts in the UK for joints that need positive locking. A split pin or lock wire passes through the slots and a cross-drilled bolt or stud, so the nut cannot back off even under vibration.
Many of our castle nuts are made in duplex, super duplex or critical high specification superalloys. We make the less common threads, including BSW, BSF, UNC, UNF and metric fine, and bespoke parts to customer or OEM drawings.
Where they are used
- Axles, hubs and wheel bearings
- Linkages and steering parts
- Rotating plant and couplings
- Rail and transport equipment
- Safety-critical joints that must not loosen
Typical specifications
Options we make to
The standards listed are those we are most often asked to make to or modify. The part supplied always follows your drawing or specification.
| Option | Typical choices |
|---|---|
| Forms | Slotted hex, castle with turned crown, thin castle, special slot counts |
| Standards | DIN 935, DIN 937, DIN 979, ASME B18.2.2 |
| Grades | Steel property classes, A2 and A4 stainless, duplex, superalloys |
| Threads | Metric coarse and fine, UNC, UNF, UN, BSW, BSF and special forms |
| Finishes | Plain, passivated, zinc flake, zinc nickel, electroless nickel, PTFE and others via coatings |
| Documentation | CoC, EN 10204 3.1 and 3.2, test reports, laser-marked heat codes |
Materials
Any grade, made in the UK
See all fastener materials. Grades are selected for corrosion, temperature and strength, and we are happy to advise.
Typical materials
- Carbon and alloy steels: mild steel, EN16, EN24, ASTM A194 2H, 4 and 7
- Stainless steels: A2, A4, 316, ASTM A194 8 and 8M, 17-4PH
- Duplex and super duplex: S31803, S32750, S32760
- Inconel, Incoloy and Monel
- Hastelloy and titanium
- Bronzes, brass and copper alloys
Why buyers come to us
- Made in our Willenhall facility, from one-offs to several hundred
- Bar from UK, EU and US mills only, with heat traceability
- Modified standards and parts to customer or OEM drawings
- EN 10204 3.1 or 3.2 certificates and UKAS-accredited testing
- Copies made from a sample or photograph, with upgrades if needed
Related products
Related types
All nut types
Back to the nuts family
Custom fasteners
Made to your drawing
Questions
Frequently asked questions
What is the difference between a slotted nut and a castle nut?
A slotted nut has slots cut across the hexagon. A castle nut has a smaller round crown above the hexagon with the slots cut in it.
How are castle nuts locked?
Castle nuts are locked with a split pin or lock wire through the slots and a hole drilled in the bolt or stud. We can supply the matching cross-drilled bolts.
Can you make castle nuts in super duplex?
Yes. Duplex, super duplex and superalloy castle nuts are made from certified bar with full traceability.
Is there a minimum order quantity?
No. We make single prototypes and urgent breakdown replacements as well as batches of several hundred.
Castle nut enquiry?
Send us your drawing or specification
Tell us the size, thread, grade, quantity and documentation you need and we will come back to you quickly.
