
Products
Special washers, machined to suit
HAGUE FASTENERS makes special washers to order: plain, machined, spherical, spring and tab washers made to your drawing or standard, in carbon and alloy steels, stainless, duplex, superalloys, bronzes and polymers.
1971
Making special fasteners since
1 to 500
One-offs to batches of several hundred
4 types
Plain, spherical, spring and tab
UK, EU, US
Mill origin of every bar
Part of the joint
Washers that match the bolt
A washer spreads load, protects the surface, corrects misalignment or stops a nut turning. HAGUE FASTENERS makes special washers in the UK when the size, thickness or material you need cannot be bought, or when the washer must carry the same grade and traceability as the bolt or stud it sits under.
We machine washers from certified bar in our Willenhall facility, so outside diameter, bore, thickness, chamfers and flatness follow your drawing. They are often supplied as complete sets with our studs, bolts and nuts.
What we offer
- Machined from solid bar for thick and large washers
- Special bores, outside diameters and thicknesses
- Matched grade and coating to the bolting
- Insulating washers in nylon and PTFE
- Supplied in traceable sets with studs and nuts
Types
Washer types we make

Round washers
Plain and machined washers in any size and grade.

Spherical washers
Matched convex and concave pairs that take up misalignment.

Spring washers
Split spring washers that keep tension in the joint.

Tab washers
Tabs bent against a flat to stop the nut or bolt turning.
Materials and finishes
Any grade, any finish
See all fastener materials and coatings.
Typical materials
- Carbon and alloy steels: EN8 to EN26, 42CrMo4, classes 8.8 to 14.9
- ASTM A193 B7, B16 and A320 L7
- Stainless steels: A2, A4, 316, B8, B8M, 17-4PH
- Duplex and super duplex, 254SMO
- Inconel, Incoloy, Monel and Hastelloy
- Titanium, bronzes and polymers
Finishes and options
- Zinc flake, zinc nickel and electroless nickel
- PTFE fluoropolymer to match coated studs
- Hardened and tempered by approved partners
- Ground faces where flatness matters
- Insulating washers for insulated bolts
- Laser-marked heat codes and part numbers
Industries
Washers for critical bolting
Our washers go under flange studs, turbine bolts, subsea connectors and structural bolting, where the washer is as important to the joint as the bolt itself.
- Nuclear QC1 safety-critical parts
- Oil and gas downhole, subsea and topside
- Power generation turbines and plant
- Chemical process in corrosion resistant grades
- Shipbuilding and marine

Questions
Frequently asked questions
Can you make special washers to my drawing?
Yes. We machine special washers to your drawing, with the bore, outside diameter, thickness and material you specify.
What are spherical washers used for?
A spherical washer set is a matched convex and concave pair that lets a bolt sit square when the bearing surface is not, so the bolt is not bent as it is tightened.
Can you supply washers to match our studs and nuts?
Yes. We make washers in the same grade and coating as the studs and nuts, and can supply them as traceable sets.
Do you make insulating washers?
Yes. We machine washers in nylon, PTFE and other engineering polymers for isolating flanges and dissimilar metals.
Do you supply certificates?
Yes. We supply certificates of conformity and EN 10204 3.1 or 3.2 material certificates, with independent UKAS-accredited test reports where required. See quality.
Washer enquiry?
Send us the size and grade
Tell us the type, dimensions, material, quantity and documentation you need and we will come back to you quickly.
