Products
Milled components, machined to drawing
HAGUE FASTENERS makes milled components in the UK: special heads, flats, slots, cross holes, clamps and drive forms such as hexagon, Torx and 12-point, on parts that cannot be bought off the shelf.
Mill-turn
Multi-axis lathes with live tooling
1 to 500
One-offs to batches of several hundred
In house
Turning, milling and threading in Willenhall
3.1 / 3.2
EN 10204 certificates
More than threads
Milled components to your design
Milled components are machined parts whose shape needs milling as well as turning: flats, slots, keyways, cross holes, special head forms and drive features. We make milled components in our Willenhall facility to customer drawings, including parts with no thread at all.
Multi-axis mill-turn lathes with live tooling and sub-spindles let us turn and mill a part in one setting, which keeps features accurate to each other. Vertical machining centres and conventional mills and slotters handle larger and one-off work.
Examples
The kind of parts we mill
Clamps and brackets
Milled from solid bar to drawing, singly or in batches.
Adaptors and connectors
Turned and milled parts joining different thread forms.
Shoulder and drive screws
Special drive forms and shoulders milled to drawing.
Slotted round nuts
Round nuts with milled slots for spanner tightening.
Polymer components
Filter fingers and other parts machined in engineering polymers.
12-point drives
Bi-hex heads milled for compact, high strength joints.
Features and materials
What we can machine
Heat treatment, NDT and coatings are managed for you through approved partners.
Typical features
- Across-flats, spanner flats and squares
- Slots, keyways and cross holes
- Hexagon, Torx, 12-point, square and special drives
- Special head forms and profiles
- Wheel studs with milled flats
- Laser-marked part numbers and heat codes
Typical materials
- Carbon and alloy steels: EN8 to EN26, 42CrMo4, classes 8.8 to 14.9
- ASTM A193 B7, B16 and A320 L7
- Stainless steels: A2, A4, 316, B8, B8M, 17-4PH
- Duplex and super duplex, 254SMO
- Inconel, Incoloy, Monel and Hastelloy
- Titanium, bronzes and polymers
Applications
Where milled components are used
Our milled components go into valves, pumps, hydraulic equipment, filtration plant and process machinery across the industries we serve, often as replacements for parts that are no longer made.
- Valve and pump components
- Hydraulic fittings and adaptors
- Filtration and process equipment
- Oil and gas and power generation plant
- Marine and water equipment
Questions
Frequently asked questions
Can you make milled components with no thread?
Yes. We quote and supply non-threaded milled components as well as fasteners, made to your drawing.
What quantities do you make milled components in?
From a single prototype or replacement to batches of several hundred.
Can you mill special drive forms?
Yes. We mill hexagon, Torx, 12-point, square and special drive forms on heads and shanks.
Can you reverse engineer an obsolete part?
Yes. Send a photograph beside a rule for a quick estimate, then the sample, and we will make a drawing and replicate it, with an upgraded material if needed.
Do you supply certificates?
Yes. We supply certificates of conformity and EN 10204 3.1 or 3.2 material certificates, with independent UKAS-accredited test reports where required. See quality.
Machined part to make?
Send us the drawing or sample
Tell us the material, quantity and documentation you need and we will come back to you quickly.