
Materials · Duplex stainless steels
Duplex and super duplex fasteners
HAGUE FASTENERS makes duplex and super duplex fasteners to order in the UK: bolts, studs, nuts and machined parts in UNS S31803, S32550, S32750 and S32760, plus 254SMO, for seawater, subsea and chloride-rich process service.
5 grades
Duplex, super duplex and 254SMO
1 to 500
Single prototypes to batches of several hundred
3.1 / 3.2
EN 10204 certificates with full traceability
UK, EU, US
Mill origin of every bar we use
Why duplex
Strength and chloride resistance together
Duplex stainless steels have a mixed structure of austenite and ferrite. That gives roughly twice the yield strength of 316 stainless and much better resistance to chloride pitting, crevice corrosion and stress corrosion cracking. Super duplex fasteners, in grades such as S32750 and S32760, push that resistance further for seawater and subsea duty.
Duplex grades are magnetic and are not usually chosen for high temperature service. They are tough and work-harden as they are cut, so they reward careful machining. HAGUE FASTENERS has made duplex bolting for offshore, chemical and water projects for many years.

Grades
Duplex grades we machine
Select a grade for its composition, properties and equivalent designations. The grade supplied always follows your specification.

UNS S31803
Standard 22% chromium duplex for chloride pitting and stress corrosion cracking resistance.

UNS S32550
Super duplex, also known as Ferralium 255, with good resistance to sulphuric, phosphoric and nitric acids.

UNS S32750
Super duplex 2507 (F53, 1.4410) with outstanding pitting and crevice resistance in seawater.

UNS S32760
Super duplex, also known as Zeron 100, developed for North Sea seawater pumps and pipework.

254SMO
Super austenitic UNS S31254 for high chloride streams, often to ASTM A193 B8MLCuN.
Choosing a grade
Matching the grade to the duty
Typical selections only. Where the temperature is higher or the chemistry more aggressive, consider Inconel 625, Hastelloy or Monel K500.
| Service environment | Grades usually considered |
|---|---|
| Seawater, firewater and subsea | S32750, S32760 |
| Chloride process streams, heat exchangers | S31803, S32750 |
| Sulphuric and phosphoric acid with chlorides | S32550 |
| Pulp mill bleach plants, brackish water | 254SMO, S31803 |
| Flue gas desulphurisation | S32760, 254SMO |
| Pump and valve bolting offshore | S32750, S32760 |
What we make
Super duplex fasteners and components
Studs and studbolts
Stud bolts, engineer studs, waisted studs and tie bars
Bolts and screws
Hexagon, 12-point, fitted and special head bolts
Nuts
Hex, heavy hex, jam, flange and special nuts
Washers
Plain, machined, spherical and tab washers
Socket screws
Non-standard cap, set, shoulder and countersunk screws
Turned and milled parts
Plugs, pins, bushes and components to drawing
Proving the material
Certified from mill to final release
Every bar comes from an approved UK, EU or US mill with its certificate, and the heat number is carried through to release. PMI and chemical analysis confirm the grade where specified, and independent UKAS-accredited testing and EN 10204 3.1 or 3.2 certificates are supplied as your order requires. See quality and testing.
- Mill certificates and heat traceability
- PMI and chemical analysis
- Charpy impact testing, including at low temperature
- Microstructure checks where specified
- Laser-marked heat codes or part numbers

Questions
Frequently asked questions
What is the difference between duplex and super duplex?
Super duplex has more chromium, molybdenum and nitrogen than standard duplex, so it resists pitting and crevice corrosion better. S31803 is a standard duplex; S32750 and S32760 are super duplex grades.
Are super duplex fasteners suitable for subsea use?
Yes. Super duplex fasteners in S32750 and S32760 are widely specified for seawater and subsea equipment because of their strength and resistance to chloride pitting and crevice corrosion.
Is Zeron 100 the same as S32760?
Yes. Zeron 100 is a trade name for the super duplex grade UNS S32760. Ferralium 255 is likewise a trade name for S32550.
Is duplex stainless steel magnetic?
Yes. Its ferrite content makes duplex magnetic. Where a non-magnetic fastener is needed, an austenitic stainless or a nickel alloy is used instead.
Can you make duplex bolts in small quantities?
Yes. We make duplex parts from a single prototype or breakdown replacement to batches of several hundred.
Useful tools
Free engineering tools
- Material equivalents finder: find the EN, UNS, ASTM, BS and JIS equivalents of a grade, such as 1.4462 or 316.
- Bolt torque calculator: tightening torque and preload for metric, UNC, UNF, BSW and BSF threads.
- Galvanic corrosion checker: check the corrosion risk when joining dissimilar metals.
- Bar weight calculator: weight of round, square and hexagon bar and plate per metre and per piece.
Free to use, no sign-up. See all our engineering tools.
Duplex enquiry?
Send us your drawing or specification
Tell us the grade, sizes, quantity and documentation you need and we will come back to you quickly.
