
Materials · Duplex
Super duplex S32550 fasteners
HAGUE FASTENERS makes super duplex S32550 fasteners to order: bolts, studs, nuts and machined parts in super duplex S32550, also known as Ferralium 255 and F61, made to your drawing in Willenhall for acid, seawater and abrasive duty.
F61
Also UNS S32550, 1.4507 and Ferralium 255
760 MPa
Minimum tensile strength
550 MPa
Minimum yield strength
1 to 500
Prototypes to batches of several hundred
About the alloy
Super duplex with copper for acids and wear
HAGUE FASTENERS makes super duplex S32550 fasteners in the UK, including Ferralium 255. S32550 offers excellent corrosion resistance in a wide variety of chemicals including sulphuric, phosphoric and nitric acids. In seawater and other chloride environments it gives outstanding resistance to pitting and crevice corrosion, with a critical pitting temperature above 50°C.
It also combines excellent ductility and impact strength, at ambient and sub-zero temperatures, with high resistance to abrasion, erosion and cavitation erosion, which makes it a good choice for pump and valve parts.
At a glance
- Super duplex stainless steel with about 2% copper
- For sulphuric, phosphoric and nitric acids
- Critical pitting temperature above 50°C
- Resists abrasion, erosion and cavitation erosion
Composition
Super duplex S32550 chemical composition
Percentage by weight.
| Element | Min % | Max % |
|---|---|---|
| Carbon (C) | – | 0.04 |
| Manganese (Mn) | – | 1.50 |
| Phosphorus (P) | – | 0.040 |
| Sulphur (S) | – | 0.030 |
| Silicon (Si) | – | 1.00 |
| Chromium (Cr) | 24.00 | 27.00 |
| Nickel (Ni) | 4.50 | 6.50 |
| Molybdenum (Mo) | 2.90 | 3.90 |
| Copper (Cu) | 1.50 | 2.50 |
| Nitrogen (N) | 0.10 | 0.25 |
| Iron (Fe) | Bal. | – |
Properties
Mechanical properties
Minimum strength values.
| Property | Value |
|---|---|
| Tensile strength, min. | 760 MPa |
| Yield strength (0.2% offset), min. | 550 MPa |
| Elongation in 2 in (50 mm) or 4D | 15% |
| Hardness | 297 HB |
This data is for general information only and may change without notice. HAGUE FASTENERS LIMITED believes it to be accurate but gives no warranty as to its accuracy or completeness and accepts no liability for its use. Actual properties may vary, and nothing here guarantees suitability for a particular use.
Equivalents and applications
Super duplex S32550 equivalents and typical uses
Alternative designations
Ferralium to MSA-MPS-51VS-SD50-BAR, Alloy 255, Alloy F255, NORSOK MDS D57 Bar, F61, Ferralium 255, Ferralium 255-SD50, EN 10088-1 1.4507, ASTM A479 UNS S32550, ASTM A276 UNS S32550 Condition A, ASME approval as Table UHA 23 and Code Case 1883, NACE MR 01-75.
Typical applications
- Sulphuric, phosphoric and nitric acid service
- Seawater and chloride environments
- Pumps, valves and shafts exposed to erosion and cavitation
- Low temperature duty needing impact strength
What we make
Fasteners we make in Super duplex S32550
Certification and testing
Certified, traceable and tested
Bar comes from approved UK, EU or US mills, with heat numbers carried through to release. Testing is by independent UKAS-accredited laboratories, with EN 10204 3.1 or 3.2 certificates as required. See quality and testing.
- Mill certificates and heat traceability
- PMI and chemical analysis
- Solution annealing by approved partners, with furnace charts
- Laser-marked heat codes or part numbers

Questions
Frequently asked questions
What is the equivalent of super duplex S32550?
Super duplex S32550 is Ferralium 255, Alloy 255, F61 and EN 1.4507.
What are super duplex S32550 fasteners used for?
Super duplex S32550 fasteners are used in acid service, seawater and chloride environments, and on pumps and valves that face erosion and cavitation.
Is Ferralium 255 the same as S32550?
Yes. Ferralium 255 is a trade name for the super duplex grade UNS S32550.
Can you supply S32550 to ASTM A479?
Yes. We make S32550 parts from bar to ASTM A479 or A276 Condition A, or to the specification you call up.
Super duplex S32550 enquiry?
Send us your drawing or specification
Tell us the sizes, quantity and documentation you need, and we will reply quickly.
