
Coatings and finishes
Fastener coatings, specified and certified
HAGUE FASTENERS supplies special fasteners with the coating your drawing or specification calls for, from zinc flake and zinc nickel to electroless nickel, PTFE and hard chrome. We manage the coating with the machining, so you have one order, one point of contact and one set of certificates.
One order
Coating managed by us with the machining
Approved
Audited coating partners
Certified
Coating certificates batch by batch
To spec
Your drawing, OEM or international standard
Coatings
The right finish for the service
Fastener coatings protect against corrosion, control friction when the joint is tightened, reduce galling and seizing, and in some cases identify the grade or part on site. The right choice depends on the base material, the environment, the temperature, the tightening method and what the fastener is joined to.
Many of the fastener coatings we supply are called up by an OEM or company specification. We review the coating requirement at contract review, alongside the drawing, material and testing, so that thread allowances, hydrogen embrittlement relief and certification are planned before manufacture starts.
Coatings we supply
- Zinc flake, such as Geomet and Delta Protekt
- Zinc and zinc nickel plating
- Electroless nickel, with or without PTFE
- PTFE fluoropolymer
- Hard chrome
- Hot dip galvanising
- Phosphate
- Passivation of stainless steels
- Sulfamate nickel
- Wax
Specifications
Coatings and typical specifications
The specifications listed are those most often called up. We supply to the specification on your drawing or purchase order, and the coating certificate is supplied with the batch.
| Coating | Typical specifications | Often chosen for |
|---|---|---|
| Zinc flake (Geomet, Delta Protekt) | To your drawing or OEM specification | High corrosion resistance in a thin, non-electrolytic coating, without hydrogen embrittlement risk from plating |
| Zinc and zinc nickel | ASTM B633, ISO 4042 | General corrosion protection; zinc nickel for longer life in harsher conditions |
| Electroless nickel, with or without PTFE | AMS 2404, ASTM B733 | Even thickness on threads and complex shapes, wear resistance, and low friction with PTFE |
| Hard chrome | QQ-C-320, ASTM B177 | Hard, wear-resistant surfaces |
| Passivation | QQ-P-35 | Restoring the corrosion resistance of stainless steels after machining |
| Hot dip galvanising | To your specification | Heavy zinc protection for structural and outdoor bolting |
| PTFE fluoropolymer | To your specification | Corrosion protection and controlled, low friction, often matched across studs and nuts |
| Phosphate, sulfamate nickel, wax | To your specification | Specific OEM and service requirements |
How we manage fastener coatings
Planned in, not added on
Contract review
The coating specification is checked with the drawing, material and testing before we accept the order.
Thread allowances
Threads are made to suit the coating thickness, so coated studs and nuts still assemble and gauge correctly.
Embrittlement relief
Hydrogen de-embrittlement baking is arranged where the material and coating call for it.
Certified
Coating certificates are supplied with the batch and linked to the traceability records.
Protection in transit
Threads that arrive as they left
A good coating is wasted if the threads are damaged on the way to site. We protect finished parts for transit to suit their size and finish, so they arrive ready to fit.
- Wax dipped thread protection
- Protective sleeves and thread protectors
- Packed and labelled to procedure, with traceability on every pack

Questions
Frequently asked questions
Can you supply special fasteners to an OEM coating specification?
Yes. Many coatings we supply are called up by an OEM or company specification. Send the specification with your drawing and we will confirm the coating and certification at quotation stage.
Do coated threads still fit?
Yes, when the coating is planned in. We make the threads to allow for the coating thickness, so coated parts assemble and gauge correctly.
What is hydrogen embrittlement and how do you avoid it?
Some plating processes can introduce hydrogen into high strength steels, which can cause delayed cracking. Where the material and coating call for it, parts are baked after plating to relieve it, or a non-electrolytic coating such as zinc flake is used.
Is the wax on delivered parts a coating?
No. Wax dipping is used to protect threads in transit. It is not a corrosion coating and is removed before fitting unless your specification says otherwise.
Useful tools
Free engineering tools
- Galvanic corrosion checker: check the corrosion risk when joining dissimilar metals.
- Material equivalents finder: find the EN, UNS, ASTM, BS and JIS equivalents of a grade, such as 1.4462 or 316.
Free to use, no sign-up. See all our engineering tools.
Coatings
Need a special fastener with a specific finish?
Send your drawing and coating specification and we will come back with a quotation.
