UNS S32760
General
Developed as a seawater resistant material for pump applications in the North Sea as a cast material. Its excellent performance, led to demand for the alloy in a wider range of product forms and the development of wrought product forms. The corrosion resistance and strength properties have led to its widespread adoption in a range of industries. Oil and gas applications include process, seawater, firewater and subsea pipework systems, with associated risers, manifolds, pressure vessels, valves and heat exchangers. Applications for industries include pollution control equipment such as flue gas desulfurization equipment (FGD), pulp and paper, power generation, chemical, pharmaceutical, desalination, mining, metallurgical and marine industries.
Chemical Composition (*Typical Values)
|
Ni |
Mo |
Si |
Cr |
C |
Mn |
N |
S |
P |
Cu |
Fe |
|
|
Min % |
6.00 |
3.00 |
– |
24.00 |
– |
– |
0.20 |
– |
– |
0.50 |
– |
|
Max % |
8.00 |
4.00 |
1.00 |
26.00 |
0.03 |
1.00 |
0.30 |
0.010 |
0.030 |
1.00 |
Bal. |
|
Other Elements |
W 0.50 / 1.00PREN = %Cr + 3.3x%Mo + 16x%N ZERON 100 PREN > 40 | ||||||||||
Mechanical Properties
|
Solution Annealed S32760 (Zeron 100) SA |
Fastener Grade S32760 (Zeron 100) FG |
Fastener Low Temperature S32760 (Zeron 100) FLT |
|
|
Tensile Strength. min. |
800 |
860 |
860 |
|
Yield Strength (0.2% offset) min. |
550 |
725 |
725 |
|
Elongation in 2” (50mm) or 4D, min. |
25 |
16 |
16 |
|
Reduction of Area, min |
50 |
50 |
50 |
|
|
|||
|
Charpy V Notch Impact Energy |
70J ave. @ -46°C |
40J ave. @ -46°C |
27J ave. @ -101°C |
|
Notes |
Max. 28HRC meets NACE MR0103-2005 for Solution Annealed condition |
Tensile properties of ASTM A193 B7, plus Charpy impacts. Max 36HRC meets NACE MR0175 / ISO15156-3 |
Tensile properties plus Charpy impacts of ASTM A320 L7. Max 36HRC meets NACE MR0175 / ISO15156-3 |
Alternative Designations
| 1.4501, X2CrNiMoCuWN25.7.4, Z3CND25.06Az, UNS S32760, F55 (A182 / A276 / A479), 12Kh13, Zeron 100SA, Zeron 100FG, Zeron 100 FLT, Fastener Grade, Fastener Low Temperature, Norsok M630 MDS D57, , NACE MR01-75, ISO 15156, EN 10088-3, PED 97/23/EC, ASTM G48 Method A, ASTM A751 COMPOSITION, ASTM A388 U/T, API 6A – PSL 4 |
The data contained in this publication is for informational purposes only and may be revised at any time without prior notice. The data is believed to be accurate and reliable, but Hague Fasteners Limited makes no representation or warranty of any kind (express or implied) and assumes no liability with respect to the accuracy or completeness of the information contained herein. Although the data is believed to be representative of the product, the actual characteristics or performance of the product may vary from what is shown in this publication. Nothing contained in this publication should be construed as guaranteeing the product for a particular use or application.