Large thin hexagon jam nut with a fine thread

Products · Nuts

Special hex jam nuts

HAGUE FASTENERS makes hex jam nuts to order: thin hexagon nuts for locking, adjustment and tight spaces, made in any grade and thread, including large diameters and fine pitches.

1971

Making special nuts for over half a century

1 to 500

Single prototypes to batches of several hundred

A194

Petrochemical grades, plus classes to 12

UK, EU, US

Mill origin of every bar we use

Nuts

Thin nuts for locking and adjustment

HAGUE FASTENERS makes hex jam nuts in the UK in the grades, sizes and threads that are hard to find. A jam nut is a thin hexagon nut, often tightened against a full nut to lock it, or used to fix an adjuster or threaded rod in place.

Many of our jam nuts are in duplex, super duplex or superalloys, often with BSW, BSF, UNC or UNF threads.

Where they are used

  • Locking a full nut on studs and rods
  • Adjusters, tie rods and turnbuckles
  • Valve stems and actuators
  • Shafts and bearing assemblies
  • Short-thread and tight-clearance joints

Typical specifications

Options we make to

The standards listed are those we are most often asked to make to or modify. The part supplied always follows your drawing or specification.

OptionTypical choices
FormsThin hex, chamfered both sides, fine pitch, large diameter, left-hand thread
StandardsISO 4035, ISO 4036, ISO 8675, DIN 439, DIN 431, BS 1083, BS 1768, BS 1769, BS 3692, ASME B18.2.2
GradesSteel property classes, A2 and A4 stainless, ASTM A194 grades, superalloys
ThreadsMetric coarse and fine, UNC, UNF, UN, BSW, BSF and special forms
FinishesPlain, passivated, zinc flake, zinc nickel, electroless nickel, PTFE and others via coatings
DocumentationCoC, EN 10204 3.1 and 3.2, test reports, laser-marked heat codes

Materials

Any grade, made in the UK

See all fastener materials. Grades are selected for corrosion, temperature and strength, and we are happy to advise.

Typical materials

Why buyers come to us

  • Made in our Willenhall facility, from one-offs to several hundred
  • Bar from UK, EU and US mills only, with heat traceability
  • Modified standards and parts to customer or OEM drawings
  • EN 10204 3.1 or 3.2 certificates and UKAS-accredited testing
  • Copies made from a sample or photograph, with upgrades if needed

Questions

Frequently asked questions

What are hex jam nuts used for?

Hex jam nuts are used to lock another nut or a threaded part in position. A jam nut is thinner than a full nut, so it carries less load and is not a direct replacement for a full nut.

How do you fit a jam nut and a full nut together?

The usual method is to fit the jam nut first, then the full nut, and hold the full nut while turning the jam nut back against it, so the full nut carries the working load.

Can you make jam nuts with a left-hand thread?

Yes. We cut left-hand and special threads to order, in metric, unified and British forms.

Is there a minimum order quantity?

No. We make single prototypes and urgent breakdown replacements as well as batches of several hundred.

Jam nut enquiry?

Send us your drawing or specification

Tell us the size, thread, grade, quantity and documentation you need and we will come back to you quickly.