Fully threaded stud bolts

Products · Studs

Stud bolts

HAGUE FASTENERS makes stud bolts to order: fully threaded studbolts for flanged and pressure joints, made in the UK in high temperature grades, super duplex and critical stainless steels, with full certification.

B7 / 2H

Studbolt assemblies made here since the 1970s

1 to 500

Single prototypes to batches of several hundred

UK, EU, US

Mill origin of every bar we use

3.1 / 3.2

EN 10204 certificates with full traceability

About Stud bolts

The studbolts imports cannot supply

Stud bolts are lengths of bar threaded from end to end, used with a nut at each end to clamp flanges, valve bonnets and pressure vessel joints. HAGUE FASTENERS was one of the original UK makers of B7/2H studbolt assemblies in the 1970s and still makes stud bolts in the UK today.

We do not compete with mass-produced imports. We make the studbolts they cannot supply: larger diameters, high temperature grades, super duplex and critical stainless steels, and studs that must be UK made from assured material.

Where our stud bolts go

  • Pipeline and process flanges
  • Valves, pumps and pressure vessels
  • Heat exchangers and boilers
  • Subsea and offshore equipment
  • High temperature turbine and steam joints

Options

Typical specifications

Typical options. We make to the standard or drawing you specify.

Option What we make
Form Fully threaded, with chamfered or rounded ends, with nuts as assemblies
Thread Metric, UNC, 8UN and other forms to ASME and BS standards
Grades ASTM A193 B7, B16, B8 and B8M; A320 L7; BS 4882 B16A; nuts to A194 2H and matching grades
Standards BS 4882, DIN 975, DIN 976, NFE 25136, ANSI B16.5 flange sizes
Finishes Self colour, zinc, zinc nickel, zinc flake (Geomet, Delta Protekt), hot dip galvanising, electroless nickel, PTFE fluoropolymer, phosphate or passivation
Documentation Certificate of conformity, EN 10204 3.1 or 3.2, test reports, dimensional reports and FAIR

Materials

Materials we use

Certified bar from UK, EU and US mills. See all fastener materials.

Manufacture and quality

Made in Willenhall, certified to release

Turned and threaded in our own Willenhall facility, with batches on automatic bar machines, from certified UK, EU and US bar.

  • Heat numbers traced from mill to release
  • Heat treatment, NDT and coating by approved partners
  • UKAS-accredited testing where specified
Lengths of threaded stud bar

Related products

Related types

Questions

Frequently asked questions

What is a stud bolt?

A stud bolt is a length of bar threaded along its full length, used with two nuts to clamp a flanged or pressure joint.

What does B7/2H mean on a studbolt?

B7 is the ASTM A193 alloy steel grade for the stud, and 2H is the ASTM A194 grade for the heavy hex nuts. Together they are the most common studbolt assembly for flanges.

Can you make stud bolts in super duplex?

Yes. We make stud bolts in duplex and super duplex S32750 and S32760, Inconel 625 and 718 and other alloys for offshore and corrosive service.

Do you make high temperature stud bolts?

Yes. High temperature grades such as B16, BS 4882 B16A, A453 660 and Nimonic 80A are a particular strength.

Can you supply UK made stud bolts with certificates?

Yes. Every stud bolt is made in Willenhall from UK, EU or US bar, with EN 10204 3.1 or 3.2 certificates. See quality.

Stud bolt enquiry?

Send us the drawing or the standard

Tell us the size, grade, nuts, coating and certification you need, and we will quote quickly.