
Products · Bolts
Hex flange bolts
HAGUE FASTENERS makes hex flange bolts to order: hexagon flange bolts with plain or serrated flanges, made to DIN, ISO and IFI standards or your drawing, in alloy steels, stainless, duplex and superalloys.
DIN 6921
Plus DIN 6922, EN 1665 and IFI 111
1 to 500
Single prototypes to batches of several hundred
UK, EU, US
Mill origin of every bar we use
3.1 / 3.2
EN 10204 certificates with full traceability
About Hex flange bolts
A built-in washer, in the grade you need
Hex flange bolts have a round flange formed under the hexagon head. The flange spreads the clamping load over a larger area, like a washer that cannot be lost or left out, and a serrated flange adds resistance to loosening. HAGUE FASTENERS makes hex flange bolts in the UK when the standard catalogue part is not available in the size, grade or thread required.
Many of our hexagon head products are in duplex, super duplex and superalloys, and many are modified versions of international standards or bespoke bolts made to customer and OEM drawings.
Where hex flange bolts are used
- Engines, gearboxes and pumps
- Slotted or oversized holes
- Soft or thin materials that need load spreading
- Assemblies where washers could be lost
- Vibration-prone equipment
Options
Typical specifications
Typical options. We make to the standard or drawing you specify.
| Option | What we make |
|---|---|
| Head | Hexagon with plain or serrated flange, or 12 point flange |
| Thread | Metric coarse and fine, UNC, UNF, UN, BSW, BSF and special forms, cut or rolled |
| Strength | Classes 8.8, 10.9, 12.9 and 14.9; ASTM A193 B7, B16, B8 and B8M; A320 L7 |
| Standards | DIN 6921, DIN 6922, EN 1665, IFI 111 |
| Finishes | Self colour, zinc, zinc nickel, zinc flake (Geomet, Delta Protekt), hot dip galvanising, electroless nickel, PTFE fluoropolymer, phosphate or passivation |
| Documentation | Certificate of conformity, EN 10204 3.1 or 3.2, test reports, dimensional reports and FAIR |
Materials
Materials we use
Certified bar from UK, EU and US mills. See all fastener materials.
- Carbon and alloy steels: EN8, EN16, EN19, EN24, EN26, 42CrMo4, B7, B16 and L7
- Stainless steels: A2, A4, 316, B8, B8M and 17-4PH
- Duplex and super duplex: S31803, S32750, S32760 and Zeron 100
- Inconel: 600, 625 and 718
- Monel: 400 and K500
- Hastelloy: C276 and C22
- Titanium: titanium alloys
- Bronzes and non-ferrous alloys: aluminium bronze, phosphor bronze and brass
Manufacture and quality
Made in Willenhall, certified to release
Machined and threaded in our own Willenhall facility from certified UK, EU and US bar, with special processes managed by us through audited partners.
- Heat numbers traced from mill to release
- Heat treatment, NDT and coating by approved partners
- UKAS-accredited testing where specified

Related products
Related types
Questions
Frequently asked questions
What is a hex flange bolt?
A hex flange bolt is a hexagon head bolt with an integral round flange under the head that acts as a built-in washer. It spreads the load and saves fitting a separate washer.
Should I choose a serrated or plain flange?
Choose serrated where you want extra resistance to loosening and the surface can take the marking; choose plain for coated, soft or sealing faces. We make both.
Which standards cover hex flange bolts?
DIN 6921 is the most widely used metric standard, with DIN 6922, EN 1665 and IFI 111 also common.
Can you make hex flange bolts in super duplex?
Yes. We make hex flange bolts in duplex, super duplex and nickel alloys for offshore and corrosive service.
Hex flange bolt enquiry?
Send us the drawing or the standard
Tell us the size, flange type, grade and quantity, and we will quote quickly.
