
Products · Bolts
Hook bolts
Hook bolts made to customer designs and OEM drawings, in carbon and alloy steels, stainless, duplex and nickel alloys, from a single bolt to a long-term supply contract.
To drawing
Made to your design or OEM drawing
1 to 500
Single prototypes to batches of several hundred
UK, EU, US
Mill origin of every bar we use
3.1 / 3.2
EN 10204 certificates with full traceability
About Hook bolts
Bespoke hook bolts, any quantity
Hook bolts are threaded bolts with a hooked end that catches over a beam, bar or edge, or anchors into concrete, while the threaded end is tightened with a nut. HAGUE FASTENERS has decades of experience making hook bolts in the UK to customer specific designs and OEM drawings.
No quantity is too small. We make a single hook bolt for a repair, a batch for a project, or supply against a call-off contract over several years, with the same certified material and documentation each time.
Where hook bolts are used
- Fixing to steel beams and sections
- Securing gratings, trays and panels
- Anchoring into concrete
- Hanging and suspension fixings
- Plant and equipment restraints
Options
Typical specifications
Typical options. We make to the standard or drawing you specify.
| Option | What we make |
|---|---|
| Hook | Hook shape, radius and leg length to your drawing |
| Thread | Metric coarse and fine, UNC, UNF, UN, BSW, BSF and special forms, cut or rolled |
| Strength | Mild steel, alloy steels, stainless A2 and A4, or to specification |
| Standards | To customer design or OEM drawing |
| Finishes | Self colour, zinc, zinc nickel, zinc flake (Geomet, Delta Protekt), hot dip galvanising, electroless nickel, PTFE fluoropolymer, phosphate or passivation |
| Documentation | Certificate of conformity, EN 10204 3.1 or 3.2, test reports, dimensional reports and FAIR |
Materials
Materials we use
Certified bar from UK, EU and US mills. See all fastener materials.
- Carbon and alloy steels: mild steel, EN8 and alloy steels
- Stainless steels: 304, 316, A2 and A4
- Duplex and super duplex: S31803 and S32760
- Monel: 400
- Inconel: 625
- Bronzes and non-ferrous alloys: aluminium bronze and phosphor bronze
Manufacture and quality
Made in Willenhall, certified to release
Machined and threaded in our own Willenhall facility from certified UK, EU and US bar, with special processes managed by us through audited partners.
- Heat numbers traced from mill to release
- Heat treatment, NDT and coating by approved partners
- UKAS-accredited testing where specified

Related products
Related types
Questions
Frequently asked questions
What is a hook bolt?
A hook bolt is a threaded bolt with a hooked end that catches over a beam, bar or edge, or anchors into concrete. A nut on the threaded end draws the hook tight.
Can you make hook bolts to my drawing?
Yes. All our hook bolts are made to customer designs or OEM drawings, with the hook shape, radius and thread to suit.
Do you make hook bolts in stainless steel?
Yes. We make hook bolts in stainless steel, duplex and nickel alloys as well as carbon steel, for corrosive and outdoor service.
Can you supply hook bolts on a call-off contract?
Yes. We can supply against a long-term order with scheduled deliveries, as well as one-off and project quantities.
Hook bolt enquiry?
Send us the drawing or the standard
Send the drawing or a sketch with dimensions, material and quantity, and we will quote quickly.
