Engineering drawing of a J bolt: threaded shank with a J shaped hook and return leg

Products · Bent bolts

J bolts

Specialist J bolts made to order to your designs and drawings, in high temperature grades, super duplex and critical stainless steels.

To drawing

Made to your design or drawing

1 to 500

Single prototypes to batches of several hundred

UK, EU, US

Mill origin of every bar we use

3.1 / 3.2

EN 10204 certificates with full traceability

About J bolts

J bolts for anchoring and hooking

J bolts are bolts bent into a J shape, with a thread on the long leg and a hook at the other end. The hook anchors into concrete or catches around a bar or section, and a nut on the thread does the clamping. HAGUE FASTENERS makes J bolts in the UK for the high end of the market: specialist J bolts made to order.

Our strength is in high temperature grades, super duplex and critical stainless steels, for anchors and fixings where corrosion or heat rules out a standard part.

Where J bolts are used

  • Anchoring equipment and columns into concrete
  • Hooking onto beams, bars and gratings
  • Tank and vessel holding down
  • Offshore and marine fixings
  • Cable tray and pipe support systems

Options

Typical specifications

Typical options. We make to the standard or drawing you specify.

Option What we make
Form Hook radius, leg length and thread length to drawing
Thread Metric coarse and fine, UNC, UNF, UN, BSW, BSF and special forms, cut or rolled
Strength Mild steel, alloy steels, stainless A2 and A4, or to specification
Standards To your design or drawing
Finishes Self colour, zinc, zinc nickel, zinc flake (Geomet, Delta Protekt), hot dip galvanising, electroless nickel, PTFE fluoropolymer, phosphate or passivation
Documentation Certificate of conformity, EN 10204 3.1 or 3.2, test reports, dimensional reports and FAIR

Materials

Materials we use

Certified bar from UK, EU and US mills. See all fastener materials.

Manufacture and quality

Made in Willenhall, certified to release

Made to your design in our Willenhall facility from certified UK, EU and US bar, then threaded and inspected with calibrated gauges.

  • Heat numbers traced from mill to release
  • Heat treatment, NDT and coating by approved partners
  • UKAS-accredited testing where specified
Checking the thread length on a large machined part

Questions

Frequently asked questions

What is a J bolt?

A J bolt is a bolt bent into a J shape, threaded on the long leg, with a hook at the other end that anchors into concrete or catches around a bar.

What is the difference between a J bolt and a hook bolt?

They are closely related. J bolts usually have a fuller, rounded hook for anchoring, while hook bolts are often shaped to catch over a particular beam or edge. See hook bolts.

Can you make J bolts in stainless steel?

Yes. We make J bolts in stainless steel, duplex and super duplex as well as carbon steel.

Can you galvanise J bolts?

Yes. Hot dip galvanising and zinc flake coatings are available through our approved coating partners, certified batch by batch.

J bolt enquiry?

Send us the drawing or the standard

Send the drawing or a sketch with dimensions, material and quantity, and we will quote quickly.