
Products · Bolts
T bolts
HAGUE FASTENERS makes T bolts to order: T head and hammer head bolts for slots, channels and machine tables, made to DIN and BS standards or your drawing, from a single bolt to a long-term supply contract.
DIN 186
Plus DIN 188, DIN 261, DIN 7992 and BS 2485
1 to 500
Single prototypes to batches of several hundred
UK, EU, US
Mill origin of every bar we use
3.1 / 3.2
EN 10204 certificates with full traceability
About T bolts
T heads that lock into slots and channels
T bolts have a T or hammer shaped head that slides into a slot or channel and turns to lock against its sides, often with a square neck to stop the bolt rotating. HAGUE FASTENERS makes T bolts in the UK to customer specific designs, OEM drawings and DIN and BS standards.
No quantity is too small, from a single bolt for a breakdown to a three year supply contract. We make T bolts in carbon and alloy steels and, for corrosive or offshore duty, in stainless steel, duplex and nickel alloys.
Where T bolts are used
- Machine tool tables and fixtures
- Strut channel and cable support systems
- Clamping in slotted plates and foundations
- Transformer, switchgear and electrical plant
- Heavy plant and frames
Options
Typical specifications
Typical options. We make to the standard or drawing you specify.
| Option | What we make |
|---|---|
| Head | T head, hammer head, with square neck or double nip, or special |
| Thread | Metric coarse and fine, UNC, UNF, UN, BSW, BSF and special forms, cut or rolled |
| Strength | Classes 8.8, 10.9, 12.9 and 14.9; ASTM A193 B7, B16, B8 and B8M; A320 L7 |
| Standards | DIN 186, DIN 188, DIN 261, DIN 7992, BS 2485 |
| Finishes | Self colour, zinc, zinc nickel, zinc flake (Geomet, Delta Protekt), hot dip galvanising, electroless nickel, PTFE fluoropolymer, phosphate or passivation |
| Documentation | Certificate of conformity, EN 10204 3.1 or 3.2, test reports, dimensional reports and FAIR |
Materials
Materials we use
Certified bar from UK, EU and US mills. See all fastener materials.
- Carbon and alloy steels: EN8, EN16, EN19, EN24, EN26, 42CrMo4, B7, B16 and L7
- Stainless steels: A2, A4, 316, B8, B8M and 17-4PH
- Duplex and super duplex: S31803, S32750, S32760 and Zeron 100
- Inconel: 600, 625 and 718
- Monel: 400 and K500
- Hastelloy: C276 and C22
Manufacture and quality
Made in Willenhall, certified to release
Machined and threaded in our own Willenhall facility from certified UK, EU and US bar, with special processes managed by us through audited partners.
- Heat numbers traced from mill to release
- Heat treatment, NDT and coating by approved partners
- UKAS-accredited testing where specified

Related products
Related types
Questions
Frequently asked questions
What is a T bolt?
A T bolt has a T or hammer shaped head that fits into a slot or channel and locks against its sides when turned. It is used to clamp parts to slotted tables, channels and frames.
Which standards cover T bolts?
DIN 186, DIN 188 and DIN 261 are the most common, with BS 2485 for machine tool T bolts. We make to these or to your drawing.
Can you make T bolts for a special slot size?
Yes. We make the head, neck and thread to suit your slot, from a drawing or a sample.
Do you make stainless steel T bolts?
Yes. We make T bolts in stainless steel, duplex and nickel alloys as well as carbon and alloy steels.
T bolt enquiry?
Send us the drawing or the standard
Send the drawing, slot size or sample, with material and quantity, and we will quote quickly.
