
Products · Bolts
Carriage bolts
Cup square and carriage bolts made in the UK to DIN 603, ISO 8677 and other standards, in any material from mild steel to Nimonic 80A.
DIN 603
Plus ISO 8677, ASME B18.5 and BS 4933
1 to 500
Single prototypes to batches of several hundred
UK, EU, US
Mill origin of every bar we use
3.1 / 3.2
EN 10204 certificates with full traceability
About Carriage bolts
Domed head, square neck, tightened from one side
Carriage bolts have a low domed head with a square neck underneath. The neck locks into a square hole or bites into timber, so the bolt cannot turn and the nut can be tightened from one side. HAGUE FASTENERS makes carriage bolts in the UK when a catalogue part will not do: a special size, a stronger or more corrosion resistant grade, or assured UK material.
Most of our carriage bolts are in certified UK or EU carbon and alloy steel, hardened to the strength you need and often zinc plated or hot dip galvanised. We also make them in stainless steel and superalloys. You specify it and we will make it.
Where carriage bolts are used
- Timber structures and heavy timber framing
- Vehicle bodies and trailers
- Security fixings with no head to grip
- Steelwork with square-punched holes
- Marine and outdoor fittings
Options
Typical specifications
Typical options. We make to the standard or drawing you specify.
| Option | What we make |
|---|---|
| Head | Round dome, mushroom or special head, square or ribbed neck |
| Thread | Metric coarse and fine, UNC, UNF, UN, BSW, BSF and special forms, cut or rolled |
| Strength | Mild steel to classes 8.8 and 10.9, stainless A2 and A4, or special grades |
| Standards | ISO 8677, ANSI B18.5.2, JIS B1171, DIN 603, NFE 27350, BS 4933, UNI 5731, UNI 5732, AS 1390 |
| Finishes | Self colour, zinc, zinc nickel, zinc flake (Geomet, Delta Protekt), hot dip galvanising, electroless nickel, PTFE fluoropolymer, phosphate or passivation |
| Documentation | Certificate of conformity, EN 10204 3.1 or 3.2, test reports, dimensional reports and FAIR |
Materials
Materials we use
Certified bar from UK, EU and US mills. See all fastener materials.
- Carbon and alloy steels: mild steel, EN8, EN16 and EN19
- Stainless steels: A2, A4, 316 and 304
- Duplex and super duplex: S31803 and S32760
- Bronzes and non-ferrous alloys: aluminium bronze and silicon bronze
- Inconel: 600 and 625
- Stainless steels: Nimonic 80A for high temperature
Manufacture and quality
Made in Willenhall, certified to release
Machined and threaded in our own Willenhall facility from certified UK, EU and US bar, with special processes managed by us through audited partners.
- Heat numbers traced from mill to release
- Heat treatment, NDT and coating by approved partners
- UKAS-accredited testing where specified

Related products
Related types
Questions
Frequently asked questions
What is a carriage bolt used for?
A carriage bolt joins timber or steel where only one side can be reached to tighten the nut. The square neck stops the bolt turning, and the smooth domed head leaves nothing to grip from the outside.
What standard are carriage bolts made to?
The main metric standards are DIN 603 and ISO 8677, with ASME B18.5 and BS 4933 for imperial sizes. We make to these or to your drawing.
Can you galvanise carriage bolts?
Yes. We supply carriage bolts zinc plated, zinc flake coated or hot dip galvanised through our approved coating partners, certified batch by batch.
Why buy UK made carriage bolts?
Because the material is certified and traceable, which matters on structural and safety-related work.
Carriage bolt enquiry?
Send us the drawing or the standard
Tell us the size, grade, finish and quantity you need, and we will quote quickly.
