
Products · Bolts
Machine screws
Small diameter machine screws in high strength stainless steel, superalloys and non-ferrous metals, made to DIN, ISO and BS standards or your drawing.
DIN 84
Plus ISO 1580, DIN 85 and BS standards
1 to 500
Single prototypes to batches of several hundred
UK, EU, US
Mill origin of every bar we use
3.1 / 3.2
EN 10204 certificates with full traceability
About Machine screws
Small screws in the materials nobody stocks
Machine screws are small diameter screws, threaded along their length, that fasten into tapped holes or nuts in instruments, electrical gear and light assemblies. HAGUE FASTENERS makes machine screws in the UK when the standard part is not available in the material, length, head or thread you need.
Most of our machine screws are made in certified UK or EU sourced stainless steel, often in high strength property classes 70, 80 or 100. We also make them in any material you require, from mild steel to Hastelloy, so a small screw can match the corrosion resistance of the equipment it holds together.
Typical specials
- Cheese, pan, countersunk and raised countersunk heads
- Slotted, socket, Torx and special drives
- Non-standard lengths and fine threads
- Non-magnetic screws in austenitic stainless or bronze
- Small batches for instruments and repairs
Options
Typical specifications
Typical options. We make to the standard or drawing you specify.
| Option | What we make |
|---|---|
| Head | Cheese, pan, countersunk, raised countersunk or special |
| Drive | Slotted, hexagon socket, Torx or special |
| Thread | Metric coarse and fine, UNC, UNF, UN, BSW, BSF and special forms, cut or rolled |
| Strength | Stainless property classes 70, 80 and 100, or to specification |
| Standards | DIN 84, DIN 85, DIN 920, DIN 925, DIN 927, ISO 1580, ISO 12007, NFE 25127, NFE 25128, BS 57, BS 93, BS 3155, BS 4183 |
| Finishes | Self colour, zinc, zinc nickel, zinc flake (Geomet, Delta Protekt), hot dip galvanising, electroless nickel, PTFE fluoropolymer, phosphate or passivation |
| Documentation | Certificate of conformity, EN 10204 3.1 or 3.2, test reports, dimensional reports and FAIR |
Materials
Materials we use
Certified bar from UK, EU and US mills. See all fastener materials.
- Stainless steels: A2 and A4 in classes 70, 80 and 100, 303, 316 and 17-4PH
- Carbon and alloy steels: mild steel and alloy steels
- Hastelloy: C276 and C22
- Monel: 400 and K500
- Titanium: titanium alloys
- Bronzes and non-ferrous alloys: brass, phosphor bronze and copper
- Polymers: nylon and PTFE
Manufacture and quality
Made in Willenhall, certified to release
Machined and threaded in our own Willenhall facility from certified UK, EU and US bar, with special processes managed by us through audited partners.
- Heat numbers traced from mill to release
- Heat treatment, NDT and coating by approved partners
- UKAS-accredited testing where specified

Related products
Related types
Questions
Frequently asked questions
What is a machine screw?
A machine screw is a small diameter screw that fastens into a tapped hole or a nut, rather than cutting its own thread. Common heads are cheese, pan and countersunk.
Can you make machine screws in Hastelloy or titanium?
Yes. We make machine screws in any material we can source from approved mills, including Hastelloy, Monel and titanium.
What strength are stainless machine screws?
Stainless machine screws are usually supplied in property class 70 or 80, and we also make class 100. The class sets the minimum tensile strength.
Do you make machine screws in small quantities?
Yes. We make machine screws from a handful for a repair or prototype to batches of several hundred.
Machine screw enquiry?
Send us the drawing or the standard
Tell us the size, head, drive, material and quantity, and we will quote quickly.
