Countersunk socket screws marked HF 8.8 069 after full-size mechanical testing

Products · Socket screws

Countersunk socket screws

HAGUE FASTENERS makes countersunk socket screws to order: hexagon socket countersunk head screws that sit flush with the surface, made in special materials, lengths and thread forms.

1971

Making non-standard socket screws since we began

1 to 500

Single prototypes to batches of several hundred

12.9 / 14.9

High strength alloy classes, plus superalloys

UK, EU, US

Mill origin of every bar we use

Socket screws

Flush fixing in special materials

HAGUE FASTENERS makes countersunk socket screws in the UK when the stocked item is the wrong grade, length or thread. The 90 degree head sits in a countersink, so the screw finishes flush with the surface and leaves nothing to catch.

Many of the countersunk socket screws we make are in duplex, super duplex or critical superalloys. We make BSW, BSF, UNC and UNF threads, and modified standards or bespoke screws to customer or OEM drawings.

Where they are used

  • Flush covers, plates and panels
  • Machine slides and tooling
  • Subsea and marine housings
  • Hinges and fittings
  • Aerodynamic or smooth surfaces

Typical specifications

Options we make to

The standards listed are those we are most often asked to make to or modify. The part supplied always follows your drawing or specification.

OptionTypical choices
Forms90 degree countersunk head, special head angles to drawing, socket or Torx drive
StandardsISO 10642, DIN 7991, ASME B18.3, BS 2470, BS 4168
GradesClasses 8.8 to 12.9, A2 and A4 stainless, duplex, nickel alloys, titanium
ThreadsMetric coarse and fine, UNC, UNF, UN, BSW, BSF and special forms
FinishesPlain, passivated, zinc flake, zinc nickel, electroless nickel, PTFE and others via coatings
DocumentationCoC, EN 10204 3.1 and 3.2, test reports, laser-marked heat codes

Materials

Any grade, made in the UK

See all fastener materials. Grades are selected for corrosion, temperature and strength, and we are happy to advise.

Typical materials

Why buyers come to us

  • Made in our Willenhall facility, from one-offs to several hundred
  • Bar from UK, EU and US mills only, with heat traceability
  • Modified standards and parts to customer or OEM drawings
  • EN 10204 3.1 or 3.2 certificates and UKAS-accredited testing
  • Copies made from a sample or photograph, with upgrades if needed

Related products

Related types

Questions

Frequently asked questions

What angle is a countersunk socket screw head?

Metric countersunk socket screws to ISO 10642 and DIN 7991 have a 90 degree head. Other angles can be made to your drawing.

Can you make countersunk socket screws in titanium?

Yes. We make them in titanium alloys, duplex, nickel alloys and stainless steels.

Can you match an old imperial countersunk screw?

Yes. Send a sample or drawing and we will match the head, thread and length.

Is there a minimum order quantity?

No. We make single prototypes and urgent breakdown replacements as well as batches of several hundred.

Countersunk screw enquiry?

Send us your drawing or specification

Tell us the size, thread, grade, quantity and documentation you need and we will come back to you quickly.