
Products · Bolts
Swing bolts
Swing bolts and eye bolts for hinged closures, made to DIN 444 or your own design in certified alloy steel, stainless steel, nickel alloys and super duplex.
DIN 444
Or your own design and drawing
1 to 500
Single prototypes to batches of several hundred
UK, EU, US
Mill origin of every bar we use
3.1 / 3.2
EN 10204 certificates with full traceability
About Swing bolts
Where the design matters as much as the material
Swing bolts have an eye at one end that fits over a pin, so the bolt can pivot into and out of a slot. With a nut or handwheel they make quick-release closures for doors, lids and covers that must be opened and sealed again. HAGUE FASTENERS makes swing bolts in the UK, often to customers’ own designs for high integrity applications.
Because the eye and pin carry the full clamping load, the design and material have to be right. We make swing bolts from certified UK or EU carbon and alloy steel with full chemical and mechanical certification, and in stainless steels, nickel alloys and super duplex where corrosion or temperature demands it.
Where swing bolts are used
- Pressure vessel and autoclave doors
- Filter and strainer housings
- Inspection hatches and manways
- Quick-release covers and clamps
- Pipe couplings and process equipment
Options
Typical specifications
Typical options. We make to the standard or drawing you specify.
| Option | What we make |
|---|---|
| Eye | Machined or formed eye, bore and width to suit your pin and slot |
| Thread | Metric coarse and fine, UNC, UNF, UN, BSW, BSF and special forms, cut or rolled |
| Strength | Classes 8.8, 10.9, 12.9 and 14.9; ASTM A193 B7, B16, B8 and B8M; A320 L7 |
| Standards | DIN 444, or your design |
| Finishes | Self colour, zinc, zinc nickel, zinc flake (Geomet, Delta Protekt), hot dip galvanising, electroless nickel, PTFE fluoropolymer, phosphate or passivation |
| Documentation | Certificate of conformity, EN 10204 3.1 or 3.2, test reports, dimensional reports and FAIR |
Materials
Materials we use
Certified bar from UK, EU and US mills. See all fastener materials.
- Carbon and alloy steels: certified UK or EU alloy steels, B7 and L7
- Stainless steels: 316, B8, B8M and 17-4PH
- Duplex and super duplex: S32750 and S32760
- Inconel: 625 and 718
- Monel: 400 and K500
- Hastelloy: C276
Manufacture and quality
Made in Willenhall, certified to release
Machined and threaded in our own Willenhall facility from certified UK, EU and US bar, with special processes managed by us through audited partners.
- Heat numbers traced from mill to release
- Heat treatment, NDT and coating by approved partners
- UKAS-accredited testing where specified

Questions
Frequently asked questions
What is a swing bolt?
A swing bolt is a bolt with an eye at one end that pivots on a pin, so it can swing into a slot and be tightened with a nut. It is used for hinged closures that are opened often.
What standard covers swing bolts?
DIN 444 is the usual standard for eye bolts used as swing bolts. Many swing bolts are made to the equipment maker’s own drawing, and we make both.
Can you make swing bolts for pressure vessels?
Yes. We make swing bolts for vessel and autoclave doors from certified material, with EN 10204 3.1 or 3.2 certificates, and we are approved to the Pressure Equipment Directive. See quality and approvals.
Do you make stainless steel swing bolts?
Yes. We make stainless steel swing bolts, and swing bolts in nickel alloys and super duplex for corrosive service.
Swing bolt enquiry?
Send us the drawing or the standard
Send the drawing or a sample, with the pin size, material and quantity, and we will quote quickly.
