Round washers made by HAGUE FASTENERS

Materials · Titanium

Titanium grade 2 fasteners

HAGUE FASTENERS makes titanium grade 2 fasteners to order: bolts, studs, nuts and washers in commercially pure titanium grade 2 (UNS R50400), made to your drawing in Willenhall for seawater, chemical and light-weight duty.

R50400

Also ASTM Grade 2 and Werkstoff 3.7034

345 MPa

Minimum tensile strength

F467 / F468

ASTM nut and bolt standards

1 to 500

Prototypes to batches of several hundred

About the alloy

Commercially pure titanium for corrosion resistance

HAGUE FASTENERS makes titanium grade 2 fasteners in the UK for marine, chemical, offshore and other demanding duty. Grade 2 is unalloyed, commercially pure (CP) titanium. In general, the tensile and yield strength of CP titanium increase with the grade number, and grade 2 offers a useful balance of strength, ductility and formability.

Titanium combines low weight with high corrosion resistance, especially in seawater and oxidising chlorides. For higher strength, see titanium grade 5.

At a glance

  • Unalloyed, commercially pure titanium
  • Excellent corrosion resistance in seawater
  • About half the density of steel
  • ASTM F467 and F468 grade 2

Composition

Titanium grade 2 chemical composition

Percentage by weight.

Element Min % Max %
Titanium (Ti) Bal. –
Carbon (C) – 0.10
Iron (Fe) – 0.30
Nitrogen (N) – 0.03
Oxygen (O) – 0.25
Hydrogen (H) – 0.0125

Properties

Mechanical properties

Minimum strength values with typical impact and hardness.

Property Value
Tensile strength 345 MPa min.
Yield strength (0.2% offset) 276 MPa min.
Elongation in 2 in (50 mm) or 4D 20%
Reduction of area 30%
Charpy impact 40 to 82 Joules
Hardness 82 HRB

This data is for general information only and may change without notice. HAGUE FASTENERS LIMITED believes it to be accurate but gives no warranty as to its accuracy or completeness and accepts no liability for its use. Actual properties may vary, and nothing here guarantees suitability for a particular use.

Equivalents and applications

Titanium grade 2 equivalents and typical uses

Alternative designations

UNS R50400, Ti-2, BS 2TA2, IMI 125, DTD 5073, ASTM Grade 2, AMS 4902, AMS 4941 and AMS 4942, MIL-T-9046 Type 1 Comp A, AIR 9182 T40, Werkstoff Nr. 3.7034, WL 3 7035, LN 9297, DIN 17850, 17860, 17862, 17863 and 17864, AICMA Ti-P 02, ASTM B265 Gr2, ASTM B337 Gr2, ASTM B338 Gr2, ASTM B348 Gr2, ASTM B367 Gr2, ASTM B381 Gr2, ASTM F67 Gr2, ASTM F467 Gr2, ASTM F468 Gr2, MIL T 9046 CP3, AIMS 08-18-002, ABS 5012.

Typical applications

  • Seawater and marine equipment
  • Chemical process plant
  • Offshore and desalination systems
  • Weight-sensitive assemblies

What we make

Fasteners we make in Titanium grade 2

Certification and testing

Certified, traceable and tested

Bar comes from approved UK, EU or US mills, with heat numbers carried through to release. Testing is by independent UKAS-accredited laboratories, with EN 10204 3.1 or 3.2 certificates as required. See quality and testing.

  • Mill certificates and heat traceability
  • PMI and chemical analysis
  • Ultrasonic and dye penetrant testing where specified
  • Laser-marked heat codes or part numbers
Bar ends laser marked with ident, cast and batch number for traceability

Questions

Frequently asked questions

What is the equivalent of titanium grade 2?

Titanium grade 2 is UNS R50400 and Werkstoff Nr. 3.7034, also known as CP titanium, IMI 125 and BS 2TA2. Bar is supplied to ASTM B348 Gr2.

Is titanium magnetic?

No. Titanium is non-magnetic.

Can you make titanium grade 2 fasteners to ASTM F467 and F468?

Yes. We make titanium grade 2 fasteners as bolts and studs to ASTM F468 and nuts to ASTM F467, or to your drawing.

Should I choose titanium grade 2 or grade 5?

Choose grade 2 where corrosion resistance and ductility matter most, and grade 5 where strength is the priority.

Titanium grade 2 enquiry?

Send us your drawing or specification

Tell us the sizes, quantity and documentation you need, and we will reply quickly.