Products · Studs
Wheel studs
Bespoke wheel studs for special vehicle manufacturers, made in the UK from quality assured alloy steel, through hardened and coated as required.
12 off
Or call-off against a longer term order
1 to 500
Single prototypes to batches of several hundred
UK, EU, US
Mill origin of every bar we use
3.1 / 3.2
EN 10204 certificates with full traceability
About Wheel studs
Wheel studs to your design, not a catalogue
Wheel studs are pressed or screwed into the wheel hub, and the wheel nuts clamp the wheel onto them. Every one carries the vehicle’s weight, braking and cornering loads. HAGUE FASTENERS makes wheel studs in the UK to the bespoke designs of special vehicle manufacturers.
All of our wheel studs are made from UK sourced, quality assured alloy steel, through hardened as required and coated if needed with zinc or manganese phosphate. Recent work includes wheel studs with milled flats. We can supply on call-off against a longer term order, or make 12 off or whatever you need.
Who we make wheel studs for
- Special vehicle manufacturers
- Low volume and bespoke vehicle builds
- Trailers, plant and specialist machinery
- Replacement studs made to an existing drawing
- Call-off supply for ongoing production. See transport
Options
Typical specifications
Typical options. We make to the standard or drawing you specify.
| Option | What we make |
|---|---|
| Form | Knurled or serrated press-fit shank, threaded or headed, milled flats to drawing |
| Thread | Metric fine, UNF and other forms to drawing |
| Strength | Through hardened alloy steel, classes 10.9 and 12.9 or to specification |
| Standards | Vehicle maker’s drawing |
| Finishes | Zinc plating, manganese phosphate, zinc flake or self colour |
| Documentation | Certificate of conformity, EN 10204 3.1 or 3.2, test reports, dimensional reports and FAIR |
Materials
Materials we use
Certified bar from UK, EU and US mills. See all fastener materials.
- Carbon and alloy steels: UK sourced alloy steels such as EN19, EN24 and 42CrMo4
- Stainless steels: 17-4PH and other stainless grades where specified
- Titanium: titanium alloys
Manufacture and quality
Made in Willenhall, certified to release
Turned and threaded in our own Willenhall facility, with batches on automatic bar machines, from certified UK, EU and US bar.
- Heat numbers traced from mill to release
- Heat treatment, NDT and coating by approved partners
- UKAS-accredited testing where specified
Questions
Frequently asked questions
Can you make wheel studs to my drawing?
Yes. All our wheel studs are made to the vehicle maker’s own design, including knurled shanks, special threads and milled flats.
What material are your wheel studs made from?
Our wheel studs are made from UK sourced, quality assured alloy steel, through hardened to the strength your drawing specifies.
What coatings do you offer for wheel studs?
Zinc plating and manganese phosphate are the most common, and zinc flake coatings are also available through our approved partners.
What is the minimum order for wheel studs?
There is no fixed minimum. We can make 12 off for a prototype or supply on call-off against a longer term order.
Wheel stud enquiry?
Send us the drawing or the standard
Send the drawing with the material, finish and quantity, and we will quote quickly.