
Materials · Stainless steels
304 stainless steel bolts and fasteners
HAGUE FASTENERS makes 304 stainless steel bolts to order: bolts, studs, nuts and machined parts in 304 and 304H stainless steel, made to your drawing from certified, traceable bar, including ASTM A193 B8 and ISO 3506 A2 bolting.
515 MPa
Tensile strength
205 MPa
Yield strength (0.2% offset)
B8
ASTM A193 bolting grade
A2
ISO 3506 steel group
About the alloy
The original 18-8 stainless steel
HAGUE FASTENERS makes 304 stainless steel bolts, studs, nuts and special fasteners in the UK. Grade 304 is one of the oldest and most widely used stainless steels, originally called 18-8 after its chromium and nickel content, and it offers an excellent combination of strength, corrosion resistance and fabricability.
304H is the higher carbon version, used where better strength at elevated temperature is needed. For general fasteners 304 is the standard austenitic choice; where chlorides are present, 316 gives better pitting resistance. See all stainless steels.
At a glance
- Austenitic chromium-nickel stainless
- Good all-round corrosion resistance
- Tough at low temperature
- Essentially non-magnetic when annealed
- Easily fabricated and welded
Chemical composition
304 stainless steel chemical composition
Weight %.
| Element | Min % | Max % |
|---|---|---|
| C (304) | – | 0.08 |
| C (304H) | 0.04 | 0.10 |
| Mn | – | 2.00 |
| Ni | 8.00 | 10.50 |
| Si | – | 1.00 |
| Cr | 18.00 | 20.00 |
| S | – | 0.03 |
| P | – | 0.045 |
| Fe | Bal. | – |
Mechanical properties
304 stainless steel mechanical properties
| Property | Value |
|---|---|
| Tensile strength (MPa) | 515 |
| Yield strength (0.2% offset) (MPa) | 205 |
| Elongation in 2 in (50 mm) or 4D (%) | 40 |
| Hardness | 92 HRB |
These figures are for general information only and may change without notice. We believe them to be accurate, but HAGUE FASTENERS LIMITED gives no warranty and accepts no liability for their accuracy or completeness. Actual properties may vary, and nothing here guarantees the material for a particular use.
Applications
Where 304 stainless steel is used
Grade 304 is the everyday stainless steel of process plant and general engineering.
- Food, drink and pharmaceutical equipment
- Water treatment and general process plant
- Valves, pumps and pipework flanges
- Low temperature and cryogenic service
- General engineering and architectural fixings

Designations
Alternative designations and specifications
AFNOR Z7CN 18-09 AISI 304 AMS 5501 AMS 5513 AMS 5560 AMS 5563 AMS 5564 AMS 5565 AMS 5566 AMS 5567 AMS 5639 AMS 5697 ASTM A167 ASTM A182 ASTM A193 (304, B8, B8A) ASTM A194 ASTM A213 ASTM A240 ASTM A249 ASTM A269 ASTM A270 ASTM A271 ASTM A276 ASTM A312 ASTM A313 ASTM A314 ASTM A320 ASTM A336 ASTM A358 ASTM A368 ASTM A376 ASTM A409 ASTM A430 ASTM A473 ASTM A478 ASTM A479 ASTM A492 ASTM A493 ASTM A511 ASTM A554 ASTM A580 ASTM A632 ASTM A666 ASTM A688 ASTM A793 ASTM A813 ASTM A814 ASTM A851 DIN 1.4301 W.Nr 1.4948 (304H) MIL A-23196 MIL S-23195 MIL S-23196 MIL S-27419 MIL S-5059 MIL T-5695 MIL T-6845 MIL T-8504 MIL T-8506 QQ S763 QQ S766 UNS S30400
In ASTM A193, 304 is bolting grade B8, supplied as Class 1 (carbide solution treated) or Class 2 (strain hardened for higher strength), with matching nuts to ASTM A194 grade 8. In ISO 3506, 304 type steels form the A2 group, with property classes A2-50, A2-70 and A2-80.
What we make
304 stainless steel fasteners and components
Made to your drawing or to the standard you specify.
Certification and testing
Certified, traceable and tested
304 stainless steel bar comes from approved UK, EU or US mills with heat traceability to release. We supply EN 10204 3.1 or 3.2 certificates, PMI where specified and independent UKAS-accredited testing. See quality and testing.
Questions
Frequently asked questions
What is the difference between 304 and 316 stainless steel bolts?
316 contains 2 to 3% molybdenum, which gives better resistance to pitting in chlorides. 304 stainless steel bolts suit general and indoor service, while 316 is the usual choice for marine and chemical duty.
What is ASTM A193 B8?
B8 is the ASTM A193 bolting grade made from 304 stainless steel. Class 1 is carbide solution treated, and Class 2 is strain hardened for higher strength.
Is 304 stainless steel magnetic?
It is essentially non-magnetic when annealed, but cold working such as thread rolling can make it slightly magnetic.
What is the equivalent of 304 stainless steel?
304 is also known as UNS S30400, AISI 304 and DIN 1.4301, and as A2 in ISO 3506.
304 stainless steel enquiry?
Send us your drawing or specification
Tell us the grade, condition, sizes, quantity and paperwork you need.
