Fitted bolts machined by HAGUE FASTENERS

Materials · Stainless steels

317L stainless steel fasteners

HAGUE FASTENERS makes 317L stainless steel fasteners to order: bolts, studs, nuts and machined parts in 317 and 317L stainless steel (UNS S31700), made to your drawing from certified, traceable bar. An austenitic grade with more molybdenum than 316L for improved pitting resistance.

3 to 4% Mo

Molybdenum, up from 2 to 3% in 316L

18 to 20% Cr

Chromium content

UNS S31700

Specified to ASTM A 240 and ASME SA-240

1 to 500

Single prototypes to batches of several hundred

About the alloy

A step up from 316L

HAGUE FASTENERS makes 317L stainless steel fasteners in the UK for process plant where 316L is close to its limit. Grade 317 is an austenitic stainless steel with increased molybdenum over 316L, 3 to 4% against 2 to 3%, for improved resistance to pitting and crevice corrosion.

Its higher chromium, nickel and molybdenum also improve resistance to many process chemicals. 317L is the low carbon version, which limits carbide precipitation during welding. It does not match super duplex or the nickel alloys, but it is a cost effective step up from 316L. See all stainless steels.

At a glance

  • Austenitic stainless with 3 to 4% molybdenum
  • Better pitting resistance than 316L
  • 317L low carbon for welded parts
  • Essentially non-magnetic when annealed

Chemical composition

317L stainless steel chemical composition

Weight %.

Element Min % Max %
Ni 11.0 15.0
Cr 18.0 20.0
Mo 3.0 4.0
Mn – 2.0
Si – 0.75
C (317) – 0.08
C (317L) – 0.030
N – 0.1
S – 0.03
P – 0.045
Fe – Balance

These figures are for general information only and may change without notice. We believe them to be accurate, but HAGUE FASTENERS LIMITED gives no warranty and accepts no liability for their accuracy or completeness. Actual properties may vary, and nothing here guarantees the material for a particular use.

Applications

Where 317L stainless steel is used

317L is used in process plant where chlorides or acids are too aggressive for 316L but a nickel alloy would be more than the duty needs.

  • Chemical and petrochemical processing
  • Pulp and paper equipment
  • Flue gas desulphurisation systems
  • Power plant condensers
Machined tensile test pieces and notched Charpy impact specimens on a test record

Designations

Alternative designations and specifications

Common trade names: 317 Stainless, 317L Stainless. Specifications: UNS S31700, W.Nr 1.4438 (317L), ASTM A 240, ASME SA-240.

What we make

317L stainless steel fasteners and components

Made to your drawing or to the standard you specify.

Certification and testing

Certified, traceable and tested

317L stainless steel bar comes from approved UK, EU or US mills with heat traceability to release. We supply EN 10204 3.1 or 3.2 certificates, PMI where specified and independent UKAS-accredited testing. See quality and testing.

Questions

Frequently asked questions

When should I choose 317L stainless steel fasteners over 316L?

Choose 317L when 316L is at risk of pitting or crevice corrosion. Its 3 to 4% molybdenum gives a useful step up in chloride resistance without moving to a nickel alloy.

What is the difference between 317 and 317L?

317L has a lower carbon limit, which reduces carbide precipitation during welding and protects corrosion resistance next to welds.

Is there an ASTM A193 bolting grade for 317?

No, 317 is not one of the common ASTM A193 bolting grades. 317L fasteners are normally ordered to your material specification and drawing, and we will confirm the details at quotation.

Can 317L be welded?

Yes. 317L is readily welded, and its low carbon content helps keep corrosion resistance in the weld area.

317L stainless steel enquiry?

Send us your drawing or specification

Tell us the grade, condition, sizes, quantity and paperwork you need.