Castle nut machined by HAGUE FASTENERS

Materials · Stainless steels

410 stainless steel fasteners

HAGUE FASTENERS makes 410 stainless steel fasteners to order: bolts, studs, nuts and machined parts in 410 stainless steel (UNS S41000), made to your drawing from certified, traceable bar, including ASTM A193 B6 bolting. A hardenable straight chromium stainless steel.

700 to 850 MPa

Tensile strength

495 MPa

Minimum yield strength (0.2% offset)

B6

ASTM A193 bolting grade

UNS S41000

Also AISI 410 and DIN 1.4006

About the alloy

Hardenable chromium stainless

HAGUE FASTENERS makes 410 stainless steel fasteners in the UK, including ASTM A193 grade B6 bolting. Grade 410 is a hardenable, straight chromium stainless steel that combines the high wear resistance of high carbon alloys with the corrosion resistance of chromium stainless steels.

Because it can be hardened and tempered, 410 reaches strengths well above annealed austenitic grades, but its corrosion resistance is lower than 304 and it is magnetic. It suits steam, water and mildly corrosive service where strength and wear resistance matter. See all stainless steels.

At a glance

  • Martensitic straight chromium stainless
  • Hardened and tempered for strength
  • Good wear resistance
  • Magnetic

Chemical composition

410 stainless steel chemical composition

Weight %.

ElementMin %Max %
C0.080.15
Mn–1.00
Si–1.00
Cr11.5013.50
S–0.03
P–0.04
FeBal.–
Ni–1.00

Mechanical properties

410 stainless steel mechanical properties

PropertyValue
Tensile strength (MPa)700 to 850
Yield strength (0.2% offset) (MPa)495 min
Elongation in 2 in (50 mm) or 4D (%)15
Hardness201 to 255 BHN

These figures are for general information only and may change without notice. We believe them to be accurate, but HAGUE FASTENERS LIMITED gives no warranty and accepts no liability for their accuracy or completeness. Actual properties may vary, and nothing here guarantees the material for a particular use.

Applications

Where 410 stainless steel is used

Grade 410 is used for fasteners and components that need hardness, strength and moderate corrosion resistance, especially in steam, water and refinery service.

  • Valve and pump components
  • Steam and power plant bolting
  • Petrochemical and refinery equipment
  • Wear resistant fasteners
Tensile test of a machined test piece with an extensometer fitted

Designations

Alternative designations and specifications

AISI 410 AMS 5504 AMS 5505 AMS 5591 AMS 5613 AMS 5776 ASTM A176 ASTM A182 (F6A, F8a) ASTM A193 (410, B6, B6X) ASTM A194 (410, B6, B6X) ASTM A240 ASTM A268 ASTM A276 ASTM A314 ASTM A336 ASTM A473 ASTM A479 ASTM A493 ASTM A511 ASTM A580 DIN 1.4006 QQ S763 QQ S766 UNS S41000

ASTM A193 lists 410 as bolting grades B6 and B6X, with matching nuts to ASTM A194.

What we make

410 stainless steel fasteners and components

Made to your drawing or to the standard you specify.

Certification and testing

Certified, traceable and tested

410 stainless steel bar comes from approved UK, EU or US mills with heat traceability to release. We supply EN 10204 3.1 or 3.2 certificates, PMI where specified and independent UKAS-accredited testing. Heat treatment is by approved partners, with furnace charts on request. See quality and testing.

Questions

Frequently asked questions

What is ASTM A193 B6?

B6 is the ASTM A193 bolting grade made from 410 stainless steel, hardened and tempered. Matching nuts are supplied to ASTM A194 grade 6.

Is 410 stainless steel magnetic?

Yes. 410 is a martensitic stainless steel and is magnetic in all conditions.

What is the difference between 410 and 304 stainless steel?

410 can be hardened for strength and wear resistance, while 304 has better corrosion resistance. 410 stainless steel fasteners are chosen when strength matters more than maximum corrosion resistance.

What is the equivalent of 410 stainless steel?

410 is also known as UNS S41000, AISI 410 and DIN 1.4006.

410 stainless steel enquiry?

Send us your drawing or specification

Tell us the grade, condition, sizes, quantity and paperwork you need.