
Industries · Oil and gas
Oil and gas fasteners for downhole, subsea and topside service
HAGUE FASTENERS makes oil and gas fasteners in the UK: studbolts, bolts, nuts and machined parts for downhole, subsea and topside use, made in our Willenhall facility to your drawing or specification, from single prototypes and urgent wellhead repairs to batches of several hundred.
1971
Making oil and gas bolting since our founding
1982
Fasteners on Shell’s North Cormorant first oil
PED
BSI-certified 2014/68/EU approval
3.1 / 3.2
EN 10204 certificates and full traceability
Every stage of oil and gas
From pipeline construction to an urgent wellhead refurbishment
HAGUE FASTENERS has made oil and gas fasteners since 1971, when the company was founded to supply non-standard bolting in exotic materials. Our fasteners were used on Shell’s North Cormorant first oil project in 1982, and today we make studbolts, bolts, nuts and machined parts for downhole, subsea and topside service.
We have manufactured for large multinational oil exploration companies, refineries and oil fields, offshore platforms, and hydrocarbon, LNG, LPG and gas processing plants. Customers come to us when a part is not available from stock: a special size, a superalloy or duplex grade nobody holds, a non-standard thread, or a standard part that must be made from UK, EU or US material.
Who we supply
- Drilling and boring equipment
- Wellhead manufacture, repair and servicing
- Pipeline construction and repair
- Flange and fittings suppliers
- Pumping and refining equipment
- Oil extraction systems and rig construction
- Repair and maintenance subcontractors
- Upstream, midstream and downstream service providers
- Isolation valve and choke equipment manufacturers
Materials
Materials for subsea, sour and high temperature service
Material choice decides how long a joint lasts offshore. We hold considerable stocks of steel and superalloy bar from UK, EU and US mills, so urgent breakdown orders can start straight away.
| Service condition | Typical grades |
|---|---|
| General and high temperature | ASTM A193 B7, B7M, B5, B6, B16 |
| Low temperature | ASTM A320 L7, L7M; austenitic B8 and B8M (Classes 1 and 2), B8C, B8TX |
| Seawater and subsea | Duplex S31803 (F51), super duplex S32760 (F55) and S32750 (F53), Ferralium 255, 254SMO, Inconel 625, Monel 400 and K500 |
| Sour and chemical service | Hastelloy C4, C22 and C276, Incoloy 800H/HT, 825 and 925, 904L, Carpenter 20 |
| High strength | Inconel 718, MP35N, 17-4PH |
The grade supplied always follows your specification, and we are happy to advise. See hydrogen embrittlement and special fastener coatings for two of the questions we are asked most often.
Products
Types of oil and gas fasteners we make
Everything is machined and threaded in our own facility, to your drawing, the standard you specify or a sample we reverse engineer.

Studbolts
All-thread and double-ended studbolts for flanges.

Engineer and waisted studs
Tapped-hole and waisted engineer studs.

Heavy hex bolts
Bolts and setscrews (hex head cap screws).

12-point bolts
Bi-hex bolts and screws, ferryheads.

Hook, tee and U bolts
Bent and shaped bolts for pipework.

Socket cap screws
Non-standard socket screws in any grade.

Heavy hex nuts
Matched nuts for studbolt sets.

Washers
Plain and machined washers.
Testing, documentation and traceability
From mill heat to installed bolt
Heat treatment, non-destructive testing and coatings are carried out by audited partners and managed by us, so you receive finished, certified parts from one point of contact. Independent UKAS-accredited testing covers tensile, proof load, Charpy impact, hardness, chemical analysis and PMI, MPI, DPI and ultrasonic testing.
Pressure equipment fasteners are made under our BSI PED 2014/68/EU approval, within our ISO 9001 quality system.
“Professional, competitive, attentive and customer focused. Can’t ask for any better from a supplier.” Global leader, oil and gas industry.
- EN 10204 3.1 and 3.2 certificates
- Inspection and Test Plans with hold and witness points
- Charpy impact testing for low temperature grades
- Traceability from mill heat to installed bolt

Questions
Frequently asked questions
Can you make oil and gas fasteners to a customer or OEM specification?
Yes. Most of our work is made to customer drawings and OEM specifications. We review the drawing, material and test requirements before accepting an order, and build any Inspection and Test Plan into the job.
Which material is best for subsea bolting?
It depends on the duty and any cathodic protection. Super duplex S32760 and S32750, Inconel 625 and Monel K500 are common choices for seawater. Tell us the application and specification and we will advise.
What is the difference between B7 and L7 studbolts?
B7 is the general and high temperature alloy steel grade to ASTM A193; L7 is a similar alloy steel to ASTM A320 that is impact tested for low temperature service. We make both.
What quantities can you supply?
From a single prototype or breakdown replacement to batches of several hundred.
Can you help with an urgent breakdown?
Yes. Because we hold stock of certified bar, urgent orders can start straight away. Call +44 (0)1902 365 865 or email sales@haguefasteners.co.uk with the drawing or sample details.
Oil and gas enquiry?
Send your drawing, specification or sample
Tell us the quantity, material and documentation requirements and we will come back to you quickly.
