Socket cap screws machined by HAGUE FASTENERS

Materials · Stainless steels

303 stainless steel fasteners

HAGUE FASTENERS makes 303 stainless steel fasteners to order: screws, studs, nuts and turned parts in 303 stainless steel (UNS S30300), made to your drawing from certified, traceable bar. A free machining austenitic grade for intricate parts in mildly corrosive service.

621 MPa

Tensile strength

241 MPa

Yield strength (0.2% offset)

83 HRB

Hardness

UNS S30300

Also AISI 303 and DIN 1.4305

About the alloy

The free machining stainless steel

HAGUE FASTENERS makes 303 stainless steel fasteners in the UK, from screws and studs to complex turned components. Grade 303 is one of the most popular free machining stainless steels, offering good strength, good corrosion resistance and much better machinability than 304.

The machinability comes from added sulphur, which helps the chip break cleanly. The trade-off is lower corrosion resistance and poorer weldability than 304, so 303 suits general and indoor duty rather than marine or chemical service. Where corrosion comes first, we usually suggest 304 or 316. See all stainless steels.

At a glance

  • Free machining austenitic stainless
  • Sulphur added for machinability
  • Good strength and corrosion resistance
  • Not recommended for welding

Chemical composition

303 stainless steel chemical composition

Weight %.

ElementMin %Max %
C–0.15
Mn–2.00
Ni8.0010.00
Si–1.00
Cr17.0019.00
S0.15–
P–0.20
FeBal.–
Mo–0.60

Mechanical properties

303 stainless steel mechanical properties

PropertyValue
Tensile strength (MPa)621
Yield strength (0.2% offset) (MPa)241
Elongation in 2 in (50 mm) or 4D (%)50
Hardness83 HRB

These figures are for general information only and may change without notice. We believe them to be accurate, but HAGUE FASTENERS LIMITED gives no warranty and accepts no liability for their accuracy or completeness. Actual properties may vary, and nothing here guarantees the material for a particular use.

Applications

Where 303 stainless steel is used

Grade 303 is used in a very wide variety of parts in the screw and general machining industries. Applications include hardware, fasteners, valve parts, nozzles and trim.

  • Screws, studs and special fasteners
  • Valve parts and fittings
  • Nozzles and trim
  • Intricate turned components
Tensile test of a machined test piece with an extensometer fitted

Designations

Alternative designations and specifications

AISI 303 AMS 5640 (TYPE 1) ASTM A194 (303, 8F, 8FA) ASTM A276 ASTM A314 ASTM A320 ASTM A473 ASTM A581 ASTM A582 ASTM A895 DIN 1.4305 UNS S30300

In ASTM A194 the grade appears as 8F and 8FA. In ISO 3506, free machining austenitic stainless steels form the A1 steel group.

What we make

303 stainless steel fasteners and components

Made to your drawing or to the standard you specify.

Certification and testing

Certified, traceable and tested

303 stainless steel bar comes from approved UK, EU or US mills with heat traceability to release. We supply EN 10204 3.1 or 3.2 certificates, PMI where specified and independent UKAS-accredited testing. See quality and testing.

Questions

Frequently asked questions

What is the difference between 303 and 304 stainless steel?

303 has added sulphur to make it easier to machine, while 304 has better corrosion resistance and weldability. Choose 303 for intricate turned parts in mild service and 304 where corrosion matters more.

Are 303 stainless steel fasteners suitable for marine use?

Generally not. The sulphur that improves machinability lowers corrosion resistance, so 316 or a higher alloy is the better choice in seawater and coastal service.

Can 303 stainless steel be welded?

It is not recommended for welding. Where a part must be welded, 304 or 316 is normally used.

What is the equivalent of 303 stainless steel?

303 is also known as UNS S30300, AISI 303 and DIN 1.4305, and appears in ASTM A194 as grade 8F.

303 stainless steel enquiry?

Send us your drawing or specification

Tell us the grade, condition, sizes, quantity and paperwork you need.