Machined tie bars made by HAGUE FASTENERS

Materials · Incoloy

Incoloy 800 fasteners

Bolts, studs, nuts and machined parts in Incoloy 800 (UNS N08800), the nickel-iron-chromium alloy for heat and corrosion together, made to your drawing in Willenhall.

N08800

Also Alloy 800 and W.Nr 1.4876

30 to 35% Ni

Nickel with 19 to 23% chromium

771 MPa

Typical tensile, cold drawn rod at 20°C

1 to 500

Prototypes to batches of several hundred

About the alloy

For heat and corrosion together

HAGUE FASTENERS makes Incoloy 800 fasteners in the UK for plant exposed to corrosive environments and high temperatures. Incoloy 800 is a nickel-iron-chromium alloy that resists oxidation and carburisation at temperature and resists chloride stress corrosion cracking.

Typical uses run from heat-treating fixtures and nitric acid heat exchangers to nuclear steam generator tubing. For higher creep strength, see Incoloy 800H/800HT.

At a glance

  • Nickel-iron-chromium alloy
  • Resists chloride stress corrosion cracking
  • Oxidation resistance at high temperature
  • Used in nuclear steam generator tubing

Composition

Incoloy 800 chemical composition

Percentage by weight.

Element Min % Max %
Nickel (Ni) 30.00 35.00
Aluminium (Al) 0.15 0.60
Titanium (Ti) 0.15 0.60
Chromium (Cr) 19.00 23.00
Carbon (C) – 0.10
Silicon (Si) – 1.00
Copper (Cu) – 0.75
Manganese (Mn) – 1.50
Iron (Fe) 39.50 –
Sulphur (S) – 0.015

Properties

Mechanical properties (cold drawn rod, typical at 20°C)

Typical values for cold drawn rod at 20°C.

Property Value
Tensile strength 771 MPa
Yield strength (0.2% offset) 690 MPa
Elongation in 2 in (50 mm) or 4D 17%
Reduction of area, min. 64%

This data is for general information only and may change without notice. HAGUE FASTENERS LIMITED believes it to be accurate but gives no warranty as to its accuracy or completeness and accepts no liability for its use. Actual properties may vary, and nothing here guarantees suitability for a particular use.

Equivalents and applications

Incoloy 800 equivalents and typical uses

Alternative designations

Incoloy 800, Alloy 800, Ferrochronin 800, Nickelvac 800, Nicrofer 3220, UNS N08800, W.Nr 1.4876, ASTM B408, ASME SB408 (rod and bar), ASTM B564, ASME SB564 (forgings), ASME Code Case 1325 (all product forms), ASME Code Case 1949 (forgings), AMS 5766 (rod and bar), ISO 9723 (rod and bar), ISO 9724 (wire), ISO 9725 (forgings), BS 3076 NA15 (rod and bar), BS 3075 NA15 (wire), VdTÜV 412.

Typical applications

  • Heat-treating baskets, trays and fixtures
  • Heat exchangers and piping in nitric acid media
  • Nuclear steam generator components
  • Pulp digester liquor heaters
  • Petroleum process heat exchangers

What we make

Fasteners we make in Incoloy 800

Certification and testing

Certified, traceable and tested

Bar comes from approved UK, EU or US mills, with heat numbers carried through to release. Testing is by independent UKAS-accredited laboratories, with EN 10204 3.1 or 3.2 certificates as required. See quality and testing.

  • Mill certificates and heat traceability
  • PMI and chemical analysis
  • Heat treatment by approved partners, with furnace charts
  • Laser-marked heat codes or part numbers
Bar ends laser marked with cast and batch numbers

Questions

Frequently asked questions

What is the equivalent of Incoloy 800?

Incoloy 800 is UNS N08800 and W.Nr 1.4876, also sold as Alloy 800, Nicrofer 3220 and Ferrochronin 800.

What is the difference between Incoloy 800 and 800H?

800H and 800HT have controlled carbon, aluminium and titanium and a high temperature anneal for a coarser grain, which gives better creep and rupture strength at high temperature.

Where are Incoloy 800 fasteners used?

Incoloy 800 fasteners are used in heat treatment equipment, chemical and petrochemical plant, and power plant where heat and corrosion act together.

Can you supply Incoloy 800 bar to ASTM B408?

Yes. We make parts from bar to ASTM B408, ASME SB408 or the specification you call up, with 3.1 or 3.2 certificates.

Incoloy 800 enquiry?

Send us your drawing or specification

Tell us the sizes, quantity and documentation you need, and we will reply quickly.