Inconel 600

INCONEL 600

General

Alloy 600 is non-magnetic, has excellent mechanical properties and a combination of high strength and good workability and is readily weldable. Alloy 600 exhibits cold forming characteristics normally associated with chromium-nickel stainless steels. Typical corrosion applications include titanium dioxide production (chloride route), perchlorethylene syntheses, vinyl chloride monomer (VCM), and magnesium chloride. Alloy 600 is used in chemical and food processing, heat treating, phenol condensers, soap manufacture, vegetable and fatty acid vessels and many more.

Chemical Composition

Cr

C

Si

Cu

Mn

Fe

Ti

Al

Mg

Ni

 

Min %

14.00

0.05

6.00

72.00

 

Max %

17.00

0.15

0.50

0.50

1.00

10.00

0.30

0.30

1.00

 

Other Elements

 

 

Mechanical Properties (Annealed)

MPA

%

Tensile Strength.

550 min.

 

Yield Strength (0.2% offset)

240 min.

 

Elongation in 2” (50mm) or 4D

 

30 min.

Reduction of Area,

 

 

 

 

Hardness

≤ 195 HB

 

 

Alternative Designations

Alloy 600, UNS N06600, NC15FE, W.Nt. 2.4816, BS3076 NA14, NiCu30, ISO9723, ASTM B167, B366, 8166, 8564, ASME SB167, SB366, SB166, SB564

The data contained in this publication is for informational purposes only and may be revised at any time without prior notice. The data is believed to be accurate and reliable, but Hague Fasteners Limited makes no representation or warranty of any kind (express or implied) and assumes no liability with respect to the accuracy or completeness of the information contained herein. Although the data is believed to be representative of the product, the actual characteristics or performance of the product may vary from what is shown in this publication. Nothing contained in this publication should be construed as guaranteeing the product for a particular use or application.